Full liquid screw water source heat pump unit (dual unit)

NegotiableUpdate on 04/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Full liquid screw water source heat pump unit (dual unit)

Product Details

满液式螺杆水源热泵机组参数表 Flooded Screw Water Source Heat Pump Unit Technical parameters
型号 Model No. of Simpsan			SPF-760WH	SPF-820WH	SPF-1000WH	SPF-1040WH	SPF-1250WH	SPF-1300WH	SPF-1500WH	SPF-1620WH	SPF-1780WH	SPF-2000WH
使用电源 Power supply			3Φ-50Hz-380V
制冷量 Rated Cooling Capacity		KW	756	815.8	990.6	1035.4	1240.2	1287.8	1499.6	1614.2	1776.2	1982.2
制冷量 Rated Cooling Capacity		Kcal/h	650160	701600	852000	890600	1066600	1107600	1289600	1388200	1527600	1704800
机组运行电流 Operating current		A	265.2	292.8	338.6	365	428.8	438	505.6	564.8	600.6	666
冷冻水量 Chilled water flow		m³/h	130	140	172	180	214	222	258	278	306	342
冷却水量 Cooling water flow		m³/h	158	172	206	214	258	266	310	336	368	410
压缩机 Compressor	型式type	-	半密闭螺杆式 Semi-hermetic screw type<
	数量Qty.	PCS	2
	启动方式 Starting mode	-	Y-Δ
	容量控制 Capacity control	%	25%~100% 有段控制或无段控制 25%~100% step or stepless control
	功率Power	KW	154.6	173	200	214.4	250.8	258.8	301.2	337.4	358.2	396.8
冷媒 Refrigerant	种类Model	-	R22
冷媒 Refrigerant	容量 Capacity	Kg	200	200	220	220	280	280	300	300	330	400
蒸发器 Evaporator	型式type	-	满液式高效壳管式换热器 Flooded high efficient shell tube heat exchanger
蒸发器 Evaporator	管径 Pipe dia.	mm	150	150	200	200	200	200	200	200	200	250
冷凝器 Condenser	型式type	-	卧式壳管式 Horizontal Shell & tube type
冷凝器 Condenser	管径 Pipe dia.	mm	150	150	200	200	200	200	200	200	250	250
保护装置 Safety Device			高底压开关,防冻保护,可溶栓/安全阀,过载保护装置,线圈过热保护器,温度自动保护开关等. High & low pressure protection, Anti-freezing protection, Safety valve, Overload protection, coil overheating protection, Temperature automatic protection switch etc.
外形尺寸 Dimension	长(L)	mm	4520	4520	4520	4520	4520	4520	4520	4520	4520	4520
	宽(W)	mm	1500	1500	1600	1600	1600	1600	1600	1600	1600	1600
	高(H)	mm	1900	1900	1900	1900	1900	1900	2000	2000	2000	2000
重量 Weight		Kg	4400	4800	5100	5200	5400	5600	5800	6100	6400	6800
Re:	1.以上规格参数能力的测定工况:冷冻水入口温度12°C,出口温度7 °C, 冷却水入口温度30°C,出口温度35°C,污垢系数0.0001 mm²°C\\W;
Re:	Cooling conditions for above specifications: Chilled water inlet 12°C, outlet 7°C, cooling water inle30°C, outlet 35°C, fouling factor 0.0001mm²°C\\W;
2.以上规格内容会因产品改良而有所变动,恕不另行通知,有特殊要求,定货前请提出要求规范.
The above specification will change without prior notice due to product improvement. Please contact us before order if you have special requirements .