Fiber laser chiller CDW-2P

Product Introduction
Fiber laser chillerThe fiber laser cooling system is widely used in laser processing equipment that uses fiber, semiconductor, ultraviolet, CO2, YAG as laser working media, including laser marking machines, laser cutting machines, laser welding machines, laser drilling machines, laser engraving machines, laser cleaning, laser coding, laser marking machines, laser wire stripping machines, laser cutting machines, laser mold welding machines, laser cladding machines, etc.

Fiber laser chillerFeatures and functions:
1. High quality brand refrigeration components with fan speed regulation and electronic expansion valve energy adjustment functions, with temperature control accuracy of ± 0.5 ℃ to ± 1.0 ℃;
2. WithRS485Communication function, which can achieve remote monitoring of the machine through the PC end;
3. Equipped with dual protection for high and low temperature, as well as high and low pressure, and intelligent anti freezing protection function;
4. Equipped with traffic display function, the traffic alarm value can be set according to customer requirements;
5. Dual water temperature design: with automatic constant temperature function, two temperature settings that can be set to different requirements, dual signal output protection function; While meeting the cooling requirements of the laser, it also provides a water temperature that is close to the ambient temperature to meet the cooling needs of the laser output end;
6. Dual water filter protection: equipped with pure water filter and deionized filter, the equipment operates more safely, and is also equipped with conductivity detection device and signal output. The conductivity alarm value can be set according to the user's laser needs, effectively protecting the laser.

Fiber laser chillerUsage instructions:
a. Open the packaging and check if the machine is intact and if the accessories are complete. Installation personnel must possess relevant professional knowledge (or have professional guidance)
b. Confirm if the equipment is properly grounded. Although the average operating current of the chiller is not high, its instantaneous operating current can sometimes reach 6-10 amperes
c. Unscrew the machine's water inlet and add cooling water. Only neutral and pure water can be used, and granular solids are not allowed in the water.
d. To protect the circulating water pump, it is strictly prohibited to operate without water!
e. Ensure that the inlet and outlet channels of the chiller are smooth, and do not put foreign objects inside the equipment!
f. When abnormal situations occur, the machine should be stopped first, the power should be cut off, and the abnormal phenomenon should be reported to professionals. Remember not to continue using it.
g. When the water temperature is lower than the ambient temperature and the ambient humidity is high, condensation water will be generated between the circulating water pipe and the surface of the cooled device.

Fiber laser chillerMain technical parameters:
Selection of parameters for fiber laser dedicated chiller CDW-2P Applicable: 1000W fiber laser cooling capacity: 5200W; frozen water flow rate: 30L/min; Warm water flow rate: 1-5 L/min; Frozen water head: 36m; Temperature control accuracy:±0.2~±0.5℃；
CDW-2.5P is suitable for: 2000W fiber laser, cooling capacity: 5800W; frozen water flow rate: 33L/min; Warm water flow rate: 1-5 L/min; Frozen water head: 45m.; Temperature control accuracy:±0.2~±0.5℃。