-
E-mail
info@cnspump.com
- Phone
-
Address
9F, No. 7, Lane 3088, Gonghe New Road (Xiangteng Fortune Plaza), Shanghai, China
Product Categories
Shanghai Zhongcheng Pump Manufacturing Co., Ltd
FPZ type self-priming plastic centrifugal pump
NegotiableUpdate on 04/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The FPZ series pumps are injection molded in one go, with high mechanical strength, strong corrosion resistance, and unique scientific structure. The pump chamber is equipped with a suction chamber, a storage chamber, a return check valve, a gas-liquid separation chamber, and a return hole. It only needs to be filled with liquid before the first start-up, and there is no need to repeat the liquid filling in the future. When suctioning the medium, the liquid can be intermittent. Within 15 minutes of liquid interruption, the liquid can continue to be suctioned. The mechanical seal does not require additional cooling water, and it is easy to operate, safe, and leak free. It is a product that replaces submersible pumps. The pump is made of non-toxic and pollution-free materials, reinforced with polypropylene RPP (suitable for temperatures ranging from -14 ℃ to 100 ℃), ABS, and UPVC for one-time injection molding.
Product Details
Product Introduction
The FPZ series pumps are injection molded in one go, with high mechanical strength, strong corrosion resistance, and unique scientific structure. The pump chamber is equipped with a suction chamber, a storage chamber, a return check valve, a gas-liquid separation chamber, and a return hole. It only needs to be filled with liquid before the first start-up, and there is no need to repeat the liquid filling in the future. When suctioning the medium, the liquid can be intermittent. Within 15 minutes of liquid interruption, the liquid can continue to be suctioned. The mechanical seal does not require additional cooling water, and it is easy to operate, safe, and leak free. It is a product that replaces submersible pumps. The pump is made of non-toxic and pollution-free materials, reinforced with polypropylene RPP (suitable for temperatures ranging from -14 ℃ to 100 ℃), ABS, and UPVC for one-time injection molding.
Model Meaning
performance parameterThis data is for reference only, please refer to the actual order!
structural drawings
Installation sizeThis data is for reference only, please refer to the actual order!
Similar Product Recommend
