Beckman 344059 uncovered

Beckman 344059 thin-walled ultra clean open tube centrifuge tubeIntroduction:

Beckman 13.2ml ultracentrifuge tube, made of UC material, 50 pieces/box, in stock.

Item number: 344059

Product Name: TUBES, UC 1 X 3-1/2 (BOX-50)

Comparison of differences between plastic centrifuge tubes, glass centrifuge tubes, and steel centrifuge tubes:

1. The advantages of plastic centrifuge tubes are transparency or semi transparency, low hardness, and the ability to extract gradients using puncture method. The disadvantages are easy deformation, poor resistance to organic solvent corrosion, and short service life. Plastic centrifuge tubes all have tube covers, which are used to prevent sample leakage, especially when used for samples with radioactivity or strong corrosiveness. Preventing sample leakage is very important; The tube cover also serves to prevent sample evaporation and support the centrifuge tube, preventing deformation of the centrifuge tube. When selecting this point, attention should also be paid to checking whether the pipe cover is tight and whether it can be tightly covered during the experiment to achieve inversion without leakage; We all know that in plastic centrifuge tubes, commonly used materials include polyethylene (PE), polycarbonate (PC), polypropylene (PP), etc. Among them, polypropylene (PP) tubes have relatively better performance. Therefore, when selecting plastic centrifuge tubes, we try to consider polypropylene plastic centrifuge tubes as much as possible.

2. When using glass centrifuge tubes, the centrifugal force should not be too high. Rubber pads are needed to prevent the tubes from breaking. Glass tubes are generally not used for high-speed centrifuges. If the sealing of the centrifuge tube cover is not good enough, the liquid cannot be filled up (for high-speed centrifuges and angle rotors are used) to prevent overflow and loss of balance. The consequence of overflow is contamination of the rotor and centrifugal chamber, which affects the normal operation of the sensor. When performing high-speed centrifugation, it is necessary to fill the centrifuge tube with liquid, as high-speed centrifugation requires high vacuum pumping, and only filling it up can prevent deformation of the centrifuge tube.

Beckman 344059 thin-walled ultra clean open tube centrifuge tube：

3. Steel centrifuge tubes have high strength, no deformation, and can resist heat, frost, and chemical corrosion. They are also widely used, but they should also avoid contact with highly corrosive chemicals such as strong acids and alkalis during use. Try to avoid the corrosion of these chemicals as much as possible.