Automatic pop-up window of battery separator weak point tester

Battery separator online weak point tester

Product model: ZKDRD-5KV-ZX

Execution standard: GB_T 13542.2-2009 IEC 60674-2:1988- Thin films for electrical insulation - Part 2: Test methods

1、 Product Usage:

Battery separator online weak point tester-This instrument is mainly used for automatically boosting the breakdown points per square meter of insulation materials such as battery separators, electrical polyurethane films, plastic films, and polypropylene films under a given DC voltage.

Application Scenario:

Can be used in conjunction with different models and specifications of slitting machines to detect electrical weaknesses online

2、 Advantages and Characteristics:

1. Easy Installation: Used in conjunction with existing slitting machines, easy to install with minimal modifications

2. Leakage current display: capable of dynamically displaying the real-time leakage current curve after the contact between conductive rubber and film

3. Test conditions: Test area/Test length

4. Start the experiment: at the set voltage/speed/at both voltage and speed

5. Test length: Record the real-time total length of the test and the length after reaching the test conditions and starting the test

6. Static breakdown: The thin film can be subjected to a breakdown test at a set voltage rise rate

7. Automatic storage: After the experiment is completed, a pop-up window will automatically prompt to store data

8. Graphic and textual report: It can display graphic and textual reports, making test data more intuitive

9. Non contact method: later expandable non-contact method testing

10. Experimental conclusion: After setting the qualified conditions, it will be automatically identified in the test report whether the qualified conditions have been met after the end of the experiment

11. Step by step test: The test length can be set for continuous testing at different voltages.

12. Boosting speed: Within 0.5 seconds, it rises to the set voltage value,

13. Data analysis: The longitudinal length difference and time difference between adjacent weak points can be automatically calculated and reported

3、 Main technical parameters:

Number Name Parameter Remarks

01 Host power 1KVA

02 Test voltage 5KV/AC/DC dual-purpose AC/DC

03 Voltage acquisition accuracy ± 2%

04 Voltage type switching AC/DC automatically switches through software without manual intervention

06 Leakage current DC 0-10mA AC0-20mA

07 Boost rate 0-5S can be set

08 Constant Voltage Maintenance Automatic Constant Voltage Maintenance

09 Voltage fluctuation ± 1%

10 Test Data: Density of Electrical Weakness Points/Leakage Current/Distance between Electrical Weakness Points

11. Voltage recovery time less than 0.5S

12 Electric Weakness Test Mode Test Area/Test Length/Step by Step Voltage Test Optional

13 Static breakdown test can perform thin film breakdown test under static conditions

14 Test Methods Contact Method

Customized according to requirements for the width of 15 film rolls and the use of existing slitting machines

22 electronic report saved in EXCEL with graphic and textual display

25 power supply voltage 220V/50HZ

26 Equipment dimensions: length, width, and height=1750 * 500 * 600 (mm)

27 Equipment weight 100kg