200 degree oil circulation temperature control machine

200 degree oil circulation temperature control machineThe pump drives the heat transfer medium (usually water or oil) from the oil tank equipped with a built-in heater to the temperature control device, and then returns to the oil tank from the temperature control device. The controller of the high-temperature oil temperature machine adjusts the temperature of the hot fluid based on the temperature sensor measuring the temperature of the hot fluid or the internal temperature of the temperature control device, thereby regulating the temperature of the temperature control device.

Generally, water based control has a lower temperature range, while oil based control has a higher temperature range. The working temperature of water type is 90 ℃, the working temperature of pressurized water type is 160 ℃~180 ℃, and the working temperature of oil type is 300 ℃ when the working temperature is ≥ 150 ℃.

200 degree oil circulation temperature control machineAs for the heat transfer medium itself, using water as the heat transfer medium is economical and environmentally friendly. Even if there is a leak, it can be directly discharged without polluting the environment. However, water is prone to corrosion and scaling of water tanks and flow channels. Therefore, in addition to pre-treatment with anti-corrosion agents, regular rust removal is also necessary during use. Using thermal oil as the heat transfer medium, the thermal conductivity is only one-third of that of water, and the cost is relatively high, making it prone to coking.

200 degree oil circulation temperature control machineMechanical piping system

All internal pipelines are seamless 304 stainless steel integrated molding, with uniform heating and low pipe resistance

There is an internal pressure relief circuit device, oil shortage alarm, and the function of protecting the pump and heating tube

3. Fast heating and cooling speed, fast stability, and small temperature difference

4. The solenoid valve adopts Taiwan's original imported Dingqi brand UNID

safety protection system

● Power overcurrent non fuse circuit breaker

● Power supply under reverse phase protection to prevent pump reversal and alarm indicator light

● Thermal overload relay protection pump overcurrent and alarm indicator light

● Water shortage protection (low water replenishment pressure alarm and indicator light)

● System safety valve (automatic pressure relief when system pressure exceeds)

● Automatic timing and exhaust function upon startup

The 200 degree oil circulation temperature control machine adoptsBY-PASS pressure regulating valve is used to prevent heating supply issues caused by blockages in user equipment pipelines.