Zhejiang Micro porous Membrane Wholesale

Manufacturer of water-based polypropylene organic filter membraneOverview and Characteristics: Polypropylene microporous membrane is made by hot melt bonding of polypropylene ultrafine fibers together. It is a type of membrane material for deep filtration and has the following characteristics: it is made from food and pharmaceutical grade polypropylene as raw material, and there are no additives in the entire production process; Stable physical and chemical properties, with good compatibility; Having a series of pore sizes, high porosity, large pollutant holding capacity, capable of backwashing and high-temperature disinfection; Good pressure resistance and accuracy: 0.1um, 0.22um, 0.45um, 0.65um-100um. Note: ⑴ The nominal accuracy is determined by the bubble pressure method using anhydrous ethanol as the detection reagent. ⑵ The flow rate is the water flow rate under the initial water pressure of 0.1MPa, membrane thickness of 0.18mm-0.35mm, and raw water turbidity of 3NTU detection conditions. The above parameters can be adjusted appropriately according to the specific requirements of the customer.
3. Specification and dimensions: Diameter (mm) 50, 60, 100, 150, 200, 300, 400, 500, 550, 600, 800, 1000, 1200, 200 × 200, 300 × 300, 400 × 400, 500 × 500, 600 × 600
Water based polypropylene organic filter membraneInstructions for use
1. PP filter membrane is made of polymer material, non-toxic, and can be widely used in fields such as medicine, chemical industry, food, and beverage.
2. PP filter membrane has excellent chemical resistance, including acid resistance, alkali resistance, and solvent resistance, including polar solvents (except for xylene, etc.).
3. PP filter membrane is temperature resistant and can be sterilized by hot pressing at 121 ° C for 30 minutes, with a working temperature below 100 ° C.
4. PP filter membrane has good strength, will not deform, no medium shedding, and will not produce re pollution. Soak in 70% ethanol for a few minutes before use before use.
5. PP filter membrane belongs to deep filtration, with low resistance, fast flow rate, and can achieve high flow rate under low pressure difference. It has a long service life and is particularly suitable for filtering high viscosity and suspended solids. The longer the filtration time, the higher the filtration accuracy.
6. PP filter membrane is hydrophilic, especially suitable for liquid or gas filtration.

Manufacturer of water-based polypropylene organic filter membrane

精度： 0.1um，0.22um，0.45um，0.65um-100um
Note: ⑴ The nominal accuracy is determined by bubble pressure method, and the detection reagent is anhydrous ethanol. The flow rate is the water flow rate under the initial water pressure of 0.1MPa, membrane thickness of 0.35mm-100mm, and raw water turbidity of 3NTU detection conditions. The above parameters can be adjusted appropriately according to the specific requirements of the customer.
Specification and dimensions: Diameter (mm) 50, 60, 100, 150, 200, 300, 400, 500, 550, 600, 800, 1000, 1200, 200 × 200, 300 × 300, 400 × 400, 500 × 500, 600 × 600

The company has won the recognition of customers from all over the country with the principles of diligence, practicality, excellence, self transcendence, and high-quality, honest service. This has led to a continuous increase in business volume and the flourishing of the enterprise's business.

The company's main products include plate and frame filters, filter cartridges, titanium rod filters, double single-layer filters, heated filters, positive pressure filters, bag filters, mixing tanks, sandwich tanks, reaction tanks, microporous folding filter cartridges, microporous filter membranes, polypropylene filter membranes, nylon filter membranes, polytetrafluoroethylene filter membranes, and stainless steel products.

The company actively explores new types of filtration equipment based on the principles of diversified operations, layered management, and strict supervision.