Haining Titanium Rod Filter Supplier

Vertical titanium rod filterPurpose:
This filter adopts 304 or 316L stainless steel material as the shell, and the internal filter element is a titanium tube, which has the characteristics of high temperature, high pressure, strong acid, strong alkali, corrosion resistance, and the filter element can be repeatedly regenerated and used. It is a hollow filter tube processed by powder metallurgy method without high-temperature sintering of titanium metal powder. It is widely used in liquid-solid separation in industries such as food, beverage, medicine, and chemical, and is particularly suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. This series of products has a compact structure, beautiful appearance, and is produced according to GMP standards. The pipe fittings are connected using standard quick release connections, which are easy to disassemble and clean.
Usage precautions: 1. Avoid scratches, collisions, dust, and oil stains.
During use, its working pressure should not exceed the rated working pressure.
During normal use, there should be at least 3-5 minutes of low-pressure start-up time, and the relative pressure difference should be controlled below 0.5Mpa. Then gradually adjust the working pressure to normal requirements (high pressure should not exceed 0.4Mpa).
After a certain period of operation, this product may experience pressure increase and flow decrease due to clogged filter elements, requiring backwashing or regeneration. The regeneration cycle depends on the rated pressure and flow rate.
Cleaning method:
After a period of use, the titanium rod filter cartridge will experience a certain degree of blockage, resulting in a decrease in flow rate and an increase in pressure at the front end of the filter, such as from below 0.22mPa to above 0.3mPa. At this point, the filter cartridge needs to be cleaned using the following methods:
For newly used filter cartridges, the method of backwashing with clean water and blowing back with gas is generally used for cleaning, that is, using water slightly higher than the working pressure (such as 0.3mPa) to inject water in the opposite direction for cleaning. The recoil time is about 1-3 minutes.
When the filtration effect does not significantly improve after multiple backwashs, a hydrochloric acid solution of less than 5%, sulfuric acid solution of less than 8%, or NaOH solution of less than 10% can be used to soak at room temperature and then rinse with clean water.
The specific choice of acid washing or alkali washing should be based on whether impurities in the filtrate are easily soluble in acid or alkali.
This filter adopts SUS316L -- SUS304 stainless steel as the shell

Vertical titanium rod filterThe insulation type and room temperature type use titanium powder sintered filter cartridges, which are generally used for coarse filtration or intermediate filtration. This filter element has the advantages of high precision, high temperature resistance, corrosion resistance, and high mechanical strength. It is widely used in the pharmaceutical, chemical, and food industries, and the shell material is 316L or 304 stainless steel. Compliant with GMP standards. This machine has movable and fixed brackets, inlet and outlet flanges, and quick clamps

Haining Yonghao Filtration Equipment Co., Ltd. is a professional enterprise specializing in the operation of filtration equipment. Its products are widely used for liquid and gas filtration in fine chemicals, pharmaceuticals, food, electronics, machinery, petroleum, environmental protection and other fields. And provide a complete set of engineering support in the above fields. Our company is engaged in the operation of microporous membranes and various stainless steel filters, which has accumulated rich sales experience and laid a solid foundation for the company's good development.