Wholesale supply of decorative brick drawing machine

The LB-6S intelligent bonding strength tensile tester and decorative brick bonding strength tester are developed based on the industry standards of the People's Republic of China, "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering" (JGJ 110-97) and "Technical Specification for External Wall Insulation Engineering" (JGJ 144-2004), specifically for testing the bonding strength of decorative bricks and external wall insulation materials.

According to the requirements of the "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering" (JGJ 110-97), the specifications of standard blocks are 95mm × 45mm and 40mm × 40mm, and the specifications of external wall insulation are 40mm × 40mm and 100mm × 100mm. When they meet the qualified requirements, their minimum tensile force is 0.64kN and maximum tensile force is 2.56kN.

During the development of the detector, due to the low bonding strength and small bonding force of the decorative tiles, the tensile force was designed to be 6.00kN to ensure the detection accuracy of various bonding forces. The manual oil pump is integrated with a through type jack, with a compact structure, durability, and the ability to continuously and evenly load. It uses a digital display system to display the bonding force value, which can automatically and accurately record the peak bonding force and maintain it. The total weight of the machine is about 2 kilograms.

The LB-6S intelligent bonding strength pull-out tester is an ideal replacement for large volume, complex structure, and inconvenient operation detectors. The detector adopts an electromechanical integrated design, and the entire set of instruments is integrated into one unit.

The performance characteristics of intelligent bonding strength pull-out tester and decorative brick bonding strength tester are as follows:

1. Integrated design, embedded measurement display circuit

2. Peak holding function

3. Can store up to 200 pieces of data

4. Time and date display

5.10 Segment Line Correction

6. Automatic shutdown and LCD lighting

7. The instrument weighs only 2kg

Technical Specifications:

1. Tensile value: 6KN, maximum tensile strength meter: 10KN

2. Tensile stroke: 10mm

3. Weight: 2.0KG

4. Accuracy level: 1.0% F.S

5. Power supply: 4.2V rechargeable battery