Wholesale of water-resistant constant temperature electric heating constant temperature incubator

Please ensure that users comply with the following safety precautions

1. The incubator must be effectively grounded.

2. A power source that meets the requirements of the incubator must be used.

3. It is not allowed to arbitrarily lengthen or shorten the power supply connection of the product.

4. Flammable, explosive, volatile, and corrosive substances are not allowed for drying and baking.

5. Do not insert hands or objects into the air inlet or outlet at will.

6. The incubator has malfunctioned and must be repaired by professional personnel.

Safety Warning

1. It is necessary to fully read and understand the instructions for using the drying oven before operating it.

2. When replacing fuses and repairing electrical components, the power plug must be unplugged.

3. If the incubator is not used for a long time, the power plug must be unplugged.

Shanghai 80L Plant Growth Chamber Electric Thermal Constant Temperature Incubator

（1） Overview

Electric constant temperature incubator is an essential equipment for industrial and agricultural production, scientific research, universities, instrument laboratory hygiene, and unit laboratories. It is used for bacterial cultivation, breeding, fermentation, and other constant temperature experiments with temperatures not exceeding 60 ℃

（2） Structure

1. The outer shell of this product is stamped with high-quality thin steel plate, with a surface sprayed with plastic. The inner liner is made of SUS304 stainless steel, double sealed, and the insulation material is high-quality silicate cotton The box is equipped with a micro fan, which circulates a gentle breeze and ensures uniform temperature inside

2. The temperature control device adopts adaptive temperature control LCD display, without the need for temperature control parameter adjustment. It has high temperature control accuracy, no overshoot, and has timing function and over temperature protection function. The timing time is 9999 minutes

3. The electrical control part is located at the top, making it easy to use and maintain

（3） Technical indicators

Product brand: Shanghai

1. Temperature resolution: 0.1 ℃, temperature control range: RT+10~65 ℃

2. Timing range: 1~9999min

3. Power supply: AC220V ± 10PHz ± 1Hz

4. Altitude: ≤ 2290m

5. Environmental temperature: 5-30 ℃

6. Studio size: 400 * 400 * 500mm

7. Dimensions: 520 * 490 * 775mm

8. Power consumption: ≤ 480W

9. Capacity: 82L

10. Load carrier: 2 pieces

11. Working mode: LCD display, button type, fuzzy PID control technology for microprocessor temperature control

12. Material interior: 304 stainless steel

10. Material exterior: 08F cold-rolled steel plate

Shanghai 80L Plant Growth Chamber Electric Thermal Constant Temperature Incubator

（4） Working principle of electrical appliances

Turn on the power switch, power on the instrument, and set the required temperature and time

The instrument automatically controls heating, with the heating element being a heating film and the control component being a bidirectional silicon controller. The instrument control principle is adaptive control.

（5） Installation and Debugging

1. Installation

The electric incubator should be placed indoors with good ventilation and no strong vibration. Flammable and explosive materials should not be placed around it. The installation room temperature should be between 5 ℃ and 40 ℃, the relative humidity should be ≤ 85%, and there should be no corrosive gases.

2. Debugging

1. Close the glass doors inside and outside the incubator.

2. Plug in the power plug and turn on the power switch.

3. Set the temperature.

4. Observe whether the temperature rises. If it rises and remains constant, it indicates that the equipment is operating normally

5. Turn off the power.