Wholesale of pneumatic diaphragm pumps

The price of pneumatic diaphragm pump

1. No need for irrigation or water diversion, suction up to 5 meters, lift up to 70 meters, outlet pressure ≥ 6 bar

2. Spacious flow and good performance, allowing for the passage of particles with a diameter of up to 10 millimeters. When pumping mud and impurities, there is minimal wear on the pump;

3. The head and flow rate can be infinitely adjusted through the opening of the air valve (the air pressure can be adjusted between 1-7 bar)

4. The pump has no rotating parts, shaft seals, diaphragms, etc. The pumped medium is separated from the moving parts and workpiece medium of the pump, and the conveyed medium will not leak outward. So when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety;

5. No electricity, safe and reliable to use in flammable and explosive places

6. Can work submerged in a medium

7. Easy to use, reliable in operation, with simple opening and closing of the gas valve for on-off operation. Even if the pump runs without medium for a long time or suddenly stops due to unexpected situations, it will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance. When the load returns to normal, it can automatically start and operate again;

8. The pump has a simple structure and few vulnerable parts. It is easy to install and maintain, and the medium transported by the pump does not come into contact with moving parts such as the valve and connecting rod. Unlike other types of pumps, the performance gradually decreases due to wear and tear of components such as rotors, pistons, gears, and blades;

The price of pneumatic diaphragm pump

Public Characteristics

1. Due to the use of air as a power source, the flow rate automatically adjusts with changes in back pressure (outlet resistance), making it suitable for fluids with medium to high viscosity. The working point of a centrifugal pump is set based on water. If it is used for fluids with slightly higher viscosity, it needs to be matched with a reducer or frequency converter, which greatly increases the cost. The same applies to gear pumps.

2. Pneumatic diaphragm pumps are reliable and cost-effective for use in flammable and explosive environments. Thirdly, the fluid will not overheat because the diaphragm pump has minimal agitation on the fluid.

3. In harsh areas of construction sites, such as construction sites and industrial and mining wastewater discharge, due to the high impurities and complex composition in the sewage, the pipelines are prone to blockage, which leads to excessive load on the electric pump and makes the motor vulnerable to heating. Pneumatic diaphragm pumps can pass particles and have adjustable flow rates, automatically stopping until unobstructed when the pipeline is blocked.

4. In addition, the pneumatic diaphragm pump has a small volume, is easy to move, does not require a foundation, occupies a very small area, and is easy and economical to install. Can be used as a mobile material conveying pump.

5. In the handling of hazardous and corrosive materials, diaphragm pumps can isolate the materials from the outside world.

6. Pneumatic diaphragm pumps can be used to transport fluids with relatively unstable chemical properties.

The role of pneumatic diaphragm pumps in the industrial field is enormous. Many tasks that are difficult for humans to manually complete can be accomplished through pneumatic diaphragm pumps, indirectly ensuring the safety of employees' work.