Wholesale of fully automatic nylon humidification box

1、 Product Features

Nylon is a material that is easily hygroscopic, and nylon that is fully hygroscopic has increased toughness compared to dry nylonAbout 8 times, nylon molecules are water absorbing molecules. Once saturated with water, they can enhance the toughness of the material. The molded nylon product must undergo humidity control treatment，To reduce the impact of water absorption on materials and improve dimensional stability.Nylon humidification boxmajorApplied to automotive industry materials, electronic and electrical products, plastic industry, etcNylon productsIn high temperature and high humidity environments, increasing the moisture content of products, improving product reliability and quality, is an important production process for enterprises and units to improve product quality and competitiveness.

two、Product Specifications(Unit: mm)

1. Model AK-ZSX-010LF Studio size: D × W × H 1000 × 1000 × 1000 External dimensions 1300 × 1700 × 1650

2. Model AK-ZSX-015LF Studio size: D × W × H 1000 × 1000 × 1500 External dimensions 1300 × 1700 × 1950

3. Model AK-ZSX-020LF Studio size: D × W × H 1200 × 1000 × 1600 External dimensions 1500 × 1700 × 1950

4. Model AK-ZSX-040LF Studio Size: D × W × H 1500 × 1500 × 1800 External Dimensions: 1800 × 2250 × 2200

5. Model AK-ZSX-060LF Studio size: D × W × H 2000 × 1500 × 2000 External dimensions 2300 × 2250 × 2200

6. Model AK-ZSX-080LF Studio size: D × W × H 2000 × 2000 × 2000 External dimensions 2300 × 2750 × 2400

7. Model AK-ZSX-100LF Studio size: D × W × H 2500 × 2000 × 2000 External dimensions 2800 × 2750 × 2400

three、Technical Specifications

1. Temperature range: 40 ℃~150 ℃;

2. Humidity range: 50% RH to 95% RH

3. Temperature fluctuation: ± 0.5 ℃

4. Temperature deviation: ± 2 ℃

5. Humidity deviation:+2% RH -3% RH

6. Heating rate: 0 ℃~3 ℃/min;

7. Moisture absorption rate: adjustable from 1% to 3%

8. Common temperature and humidity conditions: 50℃，95%RH； 60℃，95%RH； 85℃，85%RH

9. Applicable products: Nylon related products

10. Power supply: 380V 50HZ three-phase five wire system;

fourStructure and Material

1. Box material: The outer box is made of A3 steel with spray coating treatment, which has good quality, high strength, beautiful appearance, and can guarantee long-term use without deformation or peeling. The inner box is made of high-quality 304 stainless steel plate.

2. Thermal insulation material: polyurethane foam and glass fiber, flame retardant, thermal insulation, sound insulation effect is good.

3. Burning performance: Strong fire resistance.

4The room door is equipped with an electric heating film anti fog insulated glass observation window, and the room is equipped with anti high temperature lighting to provide illumination for observation.

5. Sealing strip: The test door and room are equipped with high and low temperature resistant double-layer high tension sealing strips to ensure the airtightness of the testing area.

6. Temperature measuring body: PT100 platinum resistor.

7. Test holes: There are two sets of φ 100mm test holes with plugs on the left side of the box,Used for connecting testing wires or pipelines during the testing process.

8. The distribution control box is beautiful and generous, with a reasonable location and easy operation.

fiveHeating and humidification system

1. The heater adopts a porcelain frame nickel chromium wire electric heater, which has low thermal inertia and long service life. The controller outputs a controllable pulse duty cycle PID signal and controls the heating amount through a solid-state relay, ensuring smooth and reliable control.

2. Electric heating and humidification method, armored electric heating tube, PID control method, using non-contact periodic pulse width modulation SSR (solid-state relay) control, equipped with water level control device and heater anti dry burning device.

3. Stainless steel long shaft centrifugal fan, centrifugal exhaust, rapid cooling.

sixcontrol system

1. Adopt7-inch high precisionLCD display touchTouch stylewarm and humidDegree controller.

2. Sensor: PT100.

3.Set program100 groups, each program cansetting100step999 paragraphsEach program group can be connected.

4.The system uses intelligent control software system，A complete detection device can automatically display detailed faults and alarms；The system configuration includesS232/242 or Ethernet communication interface, with local/remote capabilitiescommunicationfunctionUSB data export,Simultaneously possessing historical data table trend charts.

5Safety protection measures should be installed in the control system, including phase sequence error protection, fan overload protection, over temperature protection, and power-off protectionWater shortage and dry burning protectionearth leakage protection、Protection against short-circuit loads, etc.

sevenNylon humidification box usage environment

1. Temperature:5～35℃ 。

2. Relative humidity: ≤ 85% RH.

3. Atmospheric pressure: 86-106Kpa.

4. There is no strong vibration around.

5. No direct sunlight or direct radiation from other heat sources.

6. There is no strong airflow around, and when the surrounding air needs to be forced to flow, the airflow should not be directly blown onto the room.

7. There is no strong electromagnetic field influence around.

8. There is no high concentration of dust or corrosive substances around.

9. The venue has good ventilation.