Welcome Customer !

Membership

Help

Shanghai Qiantuo Trading Co., Ltd
Custom manufacturer

Main Products:

plast-mach>Products

Wholesale of electromagnetic valves for fully automatic BURKERT double acting actuators

NegotiableUpdate on 01/17
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Two position three-way BURKERT low-power solenoid valve 20000902 model 6518 is a two position three-way pilot valve, and model 6519 is a two position five way or three position five way valve. They together form a structural series. This type of valve can be used alone or on a block

Product Details

Two position three-way BURKERT low-power solenoid valve 20000902

Model 6518 is a two position three-way pilot valve, and model 6519 is a two position five way or three position five way valve. They together form a structural series. This type of valve can be used alone or on a block. There is no continuous air consumption during work, and its function is to control dual acting or single acting actuators. The 6014 solenoid valve is used as a pilot control device. The use of high-quality materials enables valves to be applied outdoors or in chemical environments. The structural series includes instruments with Ex license and NAMUR flange drawings. Single state valves with operating modes of C, D, and H are certified as SIL2 according to IEC 61508.

traffic

Low power consumption

Single installation or modular installation

Standard structure, EEx m and EEx i structure

G 1/4 "socket or NAMUR flange

Product Features

Orifice DN 8... DN 9

switch time

Open 20ms

Close for 50 milliseconds

Weight 700 grams (5/2 direction) 1100 grams (5/3 way)

electrical data

Working voltage 24/110/230 V/50... 60 Hz

Power consumption retention (hot coil) DC: 3 W

media data

Medium temperature -10 ° C...+50 ° C

Process/Port Connection and Communication

Electrical connection 3m cable, molded

Junction box (without fuse)

Coil with cable EPS18 ATEX 1232 X/IECEx PTB 18.0110X

II 2D Explosion proof MB III C T95 ° C Db

Coil with junction box EPS18 ATEX 1232 X/IECEx EPS 18.0110X

II 2D Ex mb tb IIIC T95 ° C Db

Environment and Installation

PTFE/graphite seal

Valve body brass

Coil epoxy resin

Insulation grade H for coils with nominal diameters DN 13... DN 50

Voltage tolerance ± 10%

Continuous rated value; KD coil with 6 switching cycles per minute

medium temperature

Standard PTFE+graphite: -40 ° C...+150 ° C PTFE+FKM: -10 ° C...+120 ° C

Steam type PTFE+graphite: 0 ℃...+150 ℃ PTFE+FKM: 0 ℃...+120 ℃

ATEX/IECEx version 10 ° C...+90 ° C

Working media: neutral gases and liquid media (such as compressed air, water, hydraulic oil), hot water, and

water vapor

viscosity 21 square millimeters per second

Electrical connections according to DIN EN 175301-803 Table A, cable plugs for cables (not included in delivery)

Protection level IP65, with cable plug

ambient temperature

Standard PTFE+graphite: -40 ° C...+45 ° C PTFE+FKM: -10 ° C...+55 ° C

Steam type PTFE+graphite: 0 ° C...+45 ° C PTFE+FKM: 0 ° C...+55 ° C

ATEX/IECEx version -10 ° C...+40 ° C

Install the actuator upright according to the required position

Two position three-way BURKERT low-power solenoid valve 20000902