Wholesale of automatic temperature and humidity control devices for supply and maintenance

NegotiableUpdate on 05/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This device is used for standard curing of test specimens The humidity is pressurized by a high-pressure water pump, causing the humidification outlet to spray mist like high humidity water (the atomization effect of humidity is very good, once turned on, it is foggy inside, just like foggy days in the morning, with low visibility, ensuring that there is moisture in every corner). In summer, the temperature is cooled by a high-power refrigeration mechanism. In winter, four sets of heating tubes are used for heating, all of which are blown to every corner by a 380 volt large fan through a constant temperature air duct. The humidity and temperature are automatically humidified, heated or cooled by this machine to the set value, achieving the goal of fully automatic constant temperature and humidity

Product Details

Maintenance room temperature and humidity automatic controllerIt is a mechanical device used to regulate the environment of standard curing rooms, mainly applied in cement product factories, construction and quality inspection units, etc., to achieve automatic control of temperature (20 ± 1 ° C) and humidity (≥ 90% RH)[The device consists of a controller, a negative ion humidifier, a stainless steel heating water tank, and an external air conditioner. It uses a digital display instrument to switch and regulate temperature and humidity, and automatically starts and stops heating, cooling, or humidification devices through sensor data to maintain a constant temperature and humidity state .

Its core hardware includes a temperature control system (3KW heating power), a humidity control system (60W humidification power), and supporting heat dissipation components, compatible with 220V AC power supply, and suitable for an area of about 20-60 square meters Installation requires ensuring pipeline insulation, a minimum of 10 nozzles, reliable grounding, and regular maintenance of water tank cleanliness and humidity sensor gauze replacement Some models, such as BYS-III, are produced by Tianjin Yaxing Automation Experimental Instrument Factory and integrate high-precision intelligent instruments and atomization humidification functions. They are suitable for standard curing environments of concrete specimens .

Maintenance room temperature and humidity automatic controllerMain technical parameters:

Temperature control error point:± 1 ℃ humidity control: 95%

Control temperature: 20 ℃ Power supply voltage: 380V (three-phase four wire)

Power frequency: 50Hz Cooling power: Depending on the compressor

Maximum control area: 20 square meters/2 horsepower air conditioning

40 square meters/3-horsepower air conditioner

60 square meters/5 horsepower air conditioner (optional by area)