Wholesale of automatic electrical temperature rise test corner

Electrical temperature rise test angle

Electrical temperature rise test angleIt is a specialized device that simulates the temperature rise of various components during the operation of electrical appliances in actual usage environments (such as against walls or corners). Its core function is to evaluate the thermal safety performance of electrical appliances and prevent fires or damage caused by overheating.

Its key components and testing logic are designed around "restoring real scenes":

•Main structure: usually an L-shaped or U-shaped frame made of metal material, simulating the corner space formed by walls and floors. The inner wall of the frame will be covered with specific heat reflection or insulation materials to match the thermal environment of different usage scenarios.

•Core function: By placing electrical appliances in designated positions (such as 10cm, 20cm from the "wall") within the testing angle, and using temperature sensors (such as thermocouples) to monitor the temperature rise of key parts such as windings, casings, and wires, it can determine whether they meet safety standards (such as the national standard GB 4706).

Product Description:

1、Electrical temperature rise test anglebased onGB4706.1（IEC60335-1)Testing requirements for "heating"

Designed and manufactured.

2Electrical temperature rise test angleMainly used to provide environmental conditions that meet standard requirements for temperature rise testing of various electrical and electrical products. Different distribution specifications, number of temperature measurement points, and external dimensions of testing angles can be customized according to the actual tested samples

Electrical temperature rise test angleTechnical Specifications:

1Size ：600x600x600mm、

600x600x1000mm

800x800x800mm

800x800x1000mm

1000x100x1000mm

1200x1200x1200mm

1500x1500x1500mm

1800x1800x1800mm (or other sizes)

2. Thermocouple: Thermocouples with a diameter less than 0.3mm, K-type, T-type, J-type (choose any one)

3. Thermocouple layout: All leads are connected to one wiring block (or optional thermocouple plugs and sockets)

4Temperature measuring copper sheet : Diameter15mm, thickness1mmbrass sheet

5Number of temperature measurement points 20 o'clock, 32 o'clock, 48 o'clock (or other requirements)

6Arrangement of temperature measurement points:100x100mmSquare (or as otherwise agreed)

7Plywood : Thickness approximately20mmPlywood, coated with matte black paint on the front and gray film board on the back

8Activity section: Bottom installation4A movable bottom wheel with a total height of approximately100mm

9Temperature patrol system: Additional configuration required (optional 64)Road patrol temperature gauge