Which is a good wear-resistant and leak free magnetic pump

Price of fluoroplastic self-priming magnetic pumpPerformance Characteristics

Fully sealed and leak free

Magnetic transmission converts dynamic sealing into static sealing, with the medium enclosed in an isolation sleeve to prevent dripping and leakage. It is particularly suitable for transporting flammable, explosive, and toxic media.

Strong corrosion resistance

Fluoroplastic material can withstand corrosion from any concentration of acid, alkali, salt, and organic solvents, replacing expensive stainless steel or special alloy pumps.

Self suction function

Through the design of gas-liquid separation chamber and reflux hole, the pump automatically eliminates the air in the pipeline after starting, forming a vacuum environment to achieve self-priming and adapt to low-level medium extraction.

Compact and easy to maintain structure

The pullback design allows for maintenance of components such as impellers and bearings without disassembling the pipeline, reducing maintenance costs and downtime.

High Efficiency and Energy Saving

Magnetic transmission reduces mechanical friction losses, synchronous drag design reduces vibration and noise, runs smoothly and consumes less energy.

Price of fluoroplastic self-priming magnetic pumpKey points before operation:

1. This series of self-priming pumps is lubricated with high-quality calcium based grease and No. 10 engine oil according to the working and operating conditions of the pump. If a grease lubricated pump is used, grease should be regularly added to the bearing box. If a machine oil lubricated pump is used, the oil level should be sufficient.

2. Check if the liquid storage inside the pump casing is higher than the upper edge of the impeller. If it is insufficient, the liquid can be directly injected into the pump body from the filling port on the pump casing. It should not be started when the liquid storage is insufficient, otherwise it will not work properly and the mechanical seal may be damaged.

3. Check whether the rotating parts of the pump are stuck or bumped.

4. Check for loose nuts at the pump body feet and connections.

5. Check the coaxiality and parallelism between the pump shaft and the motor shaft.

6. Check if there is any air leakage in the inlet pipeline, and if there is any, try to eliminate it.

7. Open the valve of the suction pipeline and slightly open (not fully open) the outlet control valve.