Which is a good material testing machine

The SHT4605 (600KN) 60 ton electro-hydraulic servo universal material testing machine adopts a fully digital high response measurement system based on DSP. The load and strain measurements are not divided throughout the process, and the test power resolution is as high as 500000 yards. Data transmission adopts USB communication and a 12Mb/s high-speed link; Meet the requirements of GB/T 228-2010 Metallic Materials Room Temperature Tensile Test Method and related standards, automatically obtain the result parameters specified in each relevant standard (if necessary, corresponding fixtures or deformation measuring devices need to be configured).

Technical Specifications

The main functions of SHT4605 electro-hydraulic servo universal material testing machine

SHT4605 (600KN) 60 ton microcomputer controlled electro-hydraulic servo energy testing machine is used for tensile, compression, bending, shear and other tests of various metal material samples, as well as special tests of some products.

Main features of SHT4605 electro-hydraulic servo universal material testing machine

1: Dual space structure, with tension space between the upper and lower crossbeams and compression space between the lower crossbeam and the test bench. The conversion of tensile and compressive tests is quite convenient; The jaws adopt a semi closed structure for better rigidity; Both the upper and lower crossbeams are made of cast steel, which has high strength and good safety;

2: The oil source adopts a silent design, which is environmentally friendly, humanized, and equipped with a differential pressure follow-up system to reduce energy consumption, minimize heat generation, and protect the oil circuit;

3: Adopting a high-speed DSP platform, its high integration, powerful control, data processing capabilities, and high reliability are unmatched by testing machines using other processors.

4: A fully digital, three loop (force, deformation, displacement) control system based on neuron adaptive PID algorithm is adopted to achieve fully digital three loop control of force, deformation, and displacement. The control loops can be automatically switched between, and a smooth transition without impact can be achieved when switching between different modes.

5: High precision 24Bit data acquisition system, high resolution, expandable to 8-channel AD acquisition.

6: USB1.1 communication, with a communication rate of 12Mb/s, using full speed mode and batch transfer method.

7: The system board adopts a 4-layer PCB anti-interference wiring method, which has strong anti-interference ability.

8: Except for the power interface, all other interfaces use standard USB interfaces, which are plug and play interfaces that can achieve hot plugging and have plug and play functionality. The interface characteristics can be set online by software. Make the layout of each interface neat and reasonable, and easy to plug and unplug.

meet the standard

GB/T 228-2010 Metallic materials - Tensile test method at room temperature

GB/T 7314-2005 Metallic materials - Room temperature compression test method

Original configuration

One set of stretching fixtures and one set of compression fixtures

Scalable configuration

Bolt stretching fixture, nut holding fixture, bending fixture, shearing fixture

Application Industry

Measurement and quality inspection; Metallurgical steel; Mechanical manufacturing; Electronic appliances; Automobile production; Wire and cable; Civil aviation; Higher education institutions; Research laboratory; Inspection, arbitration, and technical supervision departments; Building materials ceramics; Petrochemical industry; Other industries.