Which is a good 500S nylon material dehumidifier

Due to its ability to absorb moisture easily, nylon with sufficient moisture absorption has an 8-fold increase in toughness compared to dry nylon. Under normal circumstances, moisture absorption in air can also increase by 1.5-2 times.

After being treated with Dijin Machinery Environmental Protection Technology, nylon products can improve their strength. In terms of molecular structure, nylon molecules are water absorbing molecules, and once saturated with water, they can increase material recognition. Secondly, after the nylon material is produced, it can be effectively improved in terms of product performance and toughness through air heating and water treatment.

After being treated by the Dijin Nylon product humidification water treatment equipment, the water absorption rate is relatively high. The higher the proportion of amide groups, the greater the water absorption rate. After molding, it is necessary to perform humidification treatment to reduce the impact of water absorption on the material and improve its dimensional stability.

　　Interior of Nylon Material Moisture Control Water Treatment Equipmentpurpose

The nylon product humidity control machine is used for the humidity control chamber of nylon materials, including an openable closed chamber, an electric control box, a heating box, a fan, a humidification device, and a water tank. The electric control box is installed on the outer wall of the closed chamber, and a humidification device is installed on the lower part of the inner wall of the closed chamber. The heating box is installed on the inner wall of the closed chamber at the upper part of the humidification device, and a fan is installed on the inner wall of the closed chamber between the heating box and the humidification device. A water tank is installed on the outer wall of the closed chamber corresponding to the humidification device, and inlet and overflow pipes are installed between the water tank and the humidification device. The humidity control water treatment equipment has technical characteristics such as humidity control and the recovery and utilization of condensate waste heat. It can achieve automatic production control and be interconnected with the power plant production system. The technology is relatively mature and the operating cost is low. In the process of smelting metals, whether it is the materials and equipment used with the oil, we need to cool, clean, and lubricate them, and the lubricating oil may also come directly into contact with them, resulting in the formation of oily wastewater. In the food processing and production in our country, oily wastewater is generated during the cleaning and lubrication stages of nylon product humidification water treatment equipment.

It is also suitable for solving the problems of brittleness and easy fracture of various nylon materials after injection molding, which require water absorption to increase toughness and strength. Traditional methods such as boiling, dehydrating, and drying are troublesome, labor-intensive, and not environmentally friendly. Suitable for products such as connectors, power tool casings, nylon automotive parts, boat switches, and all nylon products that require water absorption to increase toughness and strength. Meet the standard: GB/T2423.4-93 Damp Heat Test

　　Interior of Nylon Material Moisture Control Water Treatment EquipmentProduct Features

The laboratory adopts a combined storage plate structure, which can be easily assembled and relocated on site by the user. The overall structure of this laboratory is well-designed, aesthetically pleasing, and free from defects such as bumps and scratches.

The interior and exterior walls of the laboratory are made of excellent cold-rolled steel plates, with surface electrostatic coating treatment, reasonable color matching, and a 100mm high temperature resistant foam insulation layer in the middle.

The workshop floor is made of anti slip patterned steel plate, and the anti slip slope should ensure that the trolley can easily enter and exit the workshop.

A double-layer anti-aging silicone sealing strip is used between the door of the box and the box to ensure the sealing of the testing area.

The laboratory adopts a single door structure, equipped with internal and external handles, and a moisture-proof lighting fixture (high temperature resistant, explosion-proof) is installed on the top of the workspace.

The equipment adopts a long axis fan, and the upper part of the workshop is equipped with a blowing air duct. There are heaters, humidifiers, evaporators and other devices installed inside to achieve strong convection and vertical diffusion circulation, so that the temperature in the laboratory is uniform and stable at all times.

This device is fully controlled by a touch screen, with simple, intuitive, and reliable operation.