Tanxing fifth axis CNC indexing plate

NegotiableUpdate on 04/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Tanxing indexing disc adopts a high tooth depth double lead worm gear with large transmission torque. Adopting an hydraulic locking system, the hydraulic locking force is high. Minimum division angle 0.001 o Division.

Product Details

■ Worm gearindexing plate, with a small division of 0.001 degrees, pneumatic brake
The motor is installed on the right side (standard type) VRNC-125/170/210/255
The motor is installed on the left side (left-hand type) VRNC-125L/170L/210L/255
Motor installed at the back (rear mounted) VRNC-125B/170B/210B/255
■Worm gear indexing disc, small indexing of 0.001 degrees, hydraulic wrap around brake
The motor is installed on the right side (standard type) MRNC-255/320/400/500/630
The motor is installed on the left (left-hand type) MRNC-255L/320L
The motor is installed on the right side (large aperture) BRNC-255A/320/400/500
Motor installed at the back (rear mounted) MRNC-255B
The motor is installed above MRNC-255T/320T/400T
Roller cam indexing disc, with a small indexing of 0.001 degrees
RGV-170/200/250/320/400 pneumatic or hydraulic brakes, high cost-effectiveness
RGM-170/200/250/320/400 hydraulic wrap around brake, large aperture
CNC three piece clutch gear indexing disc (small indexing: 1 degree or 5 degrees) MINC-255/320/400/500A
Large CNC indexing disc, worm gear structure (0.001 degrees) and three piece clutch gear structure (1 degree or 5 degrees)
■ Vertical (with the indexing disc surface perpendicular to the machine worktable) MRNC-1000/MRNC-1500
■ Horizontal (with the disk facing upwards and the circular surface) HRNC-500/630/800/1000/1650 square disk HRNC-500S/630S/800S
CNC gear type, horizontal turntable HINC-630S/800S/1500S
Four and a half axis (CNC rotary axis+manual tilt) pneumatic brake TVRNC-125/170/210 hydraulic brake MRNC-255/320/400
■ Hydraulic precision dividing disc vertical MIHC-255V/320V horizontal MIHC-340H/470H/600H/800H
■ Five axis CNC indexing disc turntable
TRNC-125H/170/210/255A/255B TRNC-321/400/500C/500D

There are also multi head CNC indexing discs, exchange workbenches, motor-driven high-speed turntables, swing heads, and horizontal exchange work
Accessories: Manual ejector pin tailstock, disc brake tailstock, servo motor, four axis cable, chuck, etc.