Supplier of combustion tester for automotive interior materials

　　Rubber and Plastic Combustion Tester/Horizontal and Vertical Combustion TesterA testing instrument used to test the combustion performance of plastic and non-metallic materials, suitable for laboratory testing methods of horizontal or vertical combustion performance of plastic and non-metallic material specimens under 50W flame conditions.

Design standards:

GB-T2408-2008 "Testing of Burning Behavior of Plastics - Horizontal and Vertical Methods" (ANSI/UL94-2006)

GBT10707-2008 "Determination of Rubber Combustion Properties" Method B (i.e. GB-T13488 "Determination of Rubber Combustion Properties - Vertical Combustion Method")

Applicable standards:

ANSI/UL94

GJB360B-2009 Test Methods for Electronic and Electrical Components

GB/T5169.16-2008

IEC60950-1

Main parameters:

1. Environmental temperature: Room temperature to 40 ℃; Relative humidity: ≤ 75%;

2. Voltage and power: 220V ± 10% 50HZ power 150W

3. The inner diameter of the lamp is 9.5mm ± 0.5mm

4. More than 0.5 cubic meters (supporting non-standard customization of 0.75m ³, 1m ³ sizes, and stainless steel box bodies)

5. Working power supply: 220V AC 50HZ

6. Flame application time: 0-99.9S (adjustable, can be preset on the touch screen)

7. Residual flame time: 0-99.9 seconds

8. Remaining burning time: 0-99.9 seconds

9. Combustion angle: 0 °, 20 °, 45 ° can be selected

10. Flame height: adjustable from 20mm to 130mm

11. Flame temperature: (100-1000) ℃ adjustable