Supplier of Xipake Screw Pump

When the prime mover drives the screw pump shaft to rotate through the variable speed device, water enters the blades and rises along the spiral flow channel until it flows out. The structure is simple, easy to manufacture, with a large flow rate, low head loss, high efficiency, and easy maintenance. However, the head is low and the speed is low, requiring the installation of a variable speed device. It is commonly used for irrigation, drainage, and lifting sewage, sludge, and other applications.

Supply of Xipake screw pumpCharacteristics of Xipake screw pump
1. Stable and low pulsation pumping, adjustable flow rate;
2. High self-priming ability;
3. Flexible installation method, vertical and horizontal, with rotatable suction end;
4. Soft and non-destructive conveying of solid materials;
5. The pump can rotate in both directions to achieve the reversal of the conveying direction.
Supply of Xipake screw pumpSelection of Xipake screw pump
1. The flow rate and speed of a screw pump are linearly related. Compared to low-speed screw pumps, high-speed screw pumps can increase flow rate and head, but their power is significantly increased. High speed accelerates the wear between the rotor and stator, which inevitably leads to premature failure of the screw pump. Moreover, the length of the stator and rotor of high-speed screw pumps is very short, which is prone to wear and tear, thus shortening the service life of the screw pump.
2. There are many types of screw pumps, and when considering their cost-effectiveness, products with low speed, long lead, excellent transmission component materials, and long rated life should be selected.
The Xipak screw pump N module forms the solid foundation of all SEEPEX single screw pumps. It delivers low viscosity to viscous media, regardless of whether they contain solids, and can be used in almost all industries - from environmental industry to chemical industry and food production. The pump is equipped with a circular flange suction and pressure interface, as well as a large spherical air inlet, which can easily suck in media containing solids.

Open hopper pumps transport viscous to semi-solid products with low or no fluidity. They are equipped with a feeding hopper with a screw conveyor to feed products into the conveying element. The spacing and diameter of the screw conveyor can vary for different media, providing good design for different applications.