Structural characteristics of traditional Chinese medicine honey pill making machine

Structural Description of Stainless Steel Traditional Chinese Medicine Pill Making Machine

1. This machine consists of two parts: strip making and pill making, with a box structure and horizontal strip making. It has a simple structure, easy operation, and convenient maintenance.

2. The strip adopts a worm gear reducer for smooth and reliable transmission.

3. The rolling and cutting mechanisms of the pill making part are located in the same gearbox, with good lubrication conditions for the components. The cutting speed can be adjusted through the knob of the continuously variable transmission, allowing the rolling cutter to achieve a speed of 6-30 revolutions per minute until the cutting speed matches the strip speed.

4. The feeding port is large, and the pressure plate flips to press the material, which is convenient for filling and can eliminate the phenomenon of shed material. The hopper is divided into upper and lower parts by the flipping axis, which is very convenient to open during cleaning.

5. Electric heating uses electric heating tubes, which are safe, reliable, and have smooth strips

6. Drip the medicine strip with alcohol, and the outside of the pill making knife is equipped with a brush to prevent sticking of the knife. The alcohol is stored in the square box of the dispensing mechanism, and the amount of alcohol is adjusted through a ball valve.

Technical parameters of stainless steel traditional Chinese medicine pill making machine:

1. Function scope: It can produce honey pills, concentrated pills, water honey pills, water pills, coating, drying, and pill shaped foods.

2. Pill making specifications: Φ 4mm, Φ 5mm, Φ 6mm, Φ 7mm, Φ 8mm

3. Productivity: 7kg/h of honey pills, motor output power: 0.18KW

4. Electric heating 1KW (1) voltage 220V, 50HZ;

(2) Voltage 110V, 60HZ;

5. The motor speed is 1400 revolutions per minute,

6. Working speed 50 revolutions per minute

7. Dimensions: 546 × 321 × 247mm

8. Machine weight: 30kg.

Precautions for use:

1. This machine is suitable for environments with temperatures ranging from -5 ℃ to 40 ℃ and relative humidity below 90%. There is no conductive dust or corrosive metal gas around, and it should be placed in a ventilated and clean location.

2. During operation, there should be no other unrelated items on the workbench. The pill making machine should be placed on a stable tabletop. After confirming the power supply voltage, the power supply should be close to the tabletop, and the power socket should have a reliable grounding wire. It is strictly prohibited to pull the power cord forcefully to prevent the pill making machine from tipping over, falling, and other accidents from occurring.

3. After using this machine, according to the diagram, remove the hexagonal screws and open the upper and lower parts with the roller as the boundary. Remove the four rollers and clean them with alcohol. Alternatively, different specifications of rollers can be replaced according to the needs of pill making, and they can be installed and reset as shown in the diagram.

4. When scrubbing with alcohol, replacing the pill making roller and the strip release clutch roller, the main power must be cut off and the power plug must be unplugged to avoid personal accidents.

5. During the start-up and use of the pill making machine, it is strictly prohibited to touch the pill making roller and the strip release clutch roller with hands, brushes or other tools to avoid finger injuries. It is also strictly prohibited to process the pill with electricity under the protection of the upper cover shell and gearbox cover to avoid unnecessary personal accidents.

6. If the power cord is damaged (such as exposed bare wire, etc.), the power cord must be used. Purchase replacement from the local office maintenance department. If the switch or socket fails, it must be stopped from use. It is strictly prohibited to change the circuit and continue to use it. It is necessary to replace the switch or socket with the same specification in a timely manner to avoid mechanical or personal accidents.

7. Proportioning method: Mix honey pills, water pills, and coated medicine noodles. Please refer to the reference formula for making pills for details.

8. When not in use, the water pill coating machine can be directly disassembled and washed, rotated clockwise, and pulled out. Place it in a reliable and clean location for use, and apply a small amount of clean cooking oil to the exposed part of the water pill coating machine shaft to prevent floating rust. It is strictly prohibited to directly clean the entire machine or electric heater with water. When not in use, this machine must be placed in a dry, clean, and ventilated place. During the use of the electric heater, it is strictly prohibited to come into contact with water to prevent conductivity and prevent personal accidents such as electric shock.