Small one out semi automatic bottle blowing machine

Why can't the bottles of the small one out semi-automatic bottle blowing machine be removed from the mold after being blown?

Firstly, the mold should be opened and manually opened and closed. If it is normal, run it in an empty running state. If it is also normal. Please check your exhaust time setting. If the exhaust setting is normal and the malfunction occurs every time the bottle is blown, it can be determined that it is a problem with the exhaust valve. Please open the exhaust valve and check the condition of its spring and seal (another symptom of this malfunction is that the exhaust sound is too loud or there is an incomplete exhaust sound).

If you encounter a situation where the mold cannot be opened due to the normal production of many molds, please check if there is a screw with a segment in the locking pin, and also check if the locking force is too strong. If it is too strong, it should be readjusted according to the standard.

What is the reason for the bottles of the small one out semi-automatic bottle blowing machine always getting stuck?

Is the position of the robotic arm misaligned. This situation requires manual resetting of the robotic arm, which is caused by misalignment. High qualitycap mouldPurchase from Taizhou Huangyan Supa Mold&Plastic Co., Ltd.