Hand inserted automatic PP bottle blowing machine

Operation specifications for hand inserted automatic PP bottle blowing machine:

Essential knowledge for safe operation of fully automatic bottle blowing machine

(1) Before starting each shift, lubricating oil must be added to each moving component once. (Robot arm, robot arm guide rail, opening and closing mold guide rail)

(2) Swing the arm once every 3-4 days. The heating machine's large chain and small chain can be used once a month. Regularly check whether the main engine reducer and heating machine reducer are short of oil. The main engine bearings can be added once every 3 months.

(3) Before production, check whether the moving parts are firm, whether the screws are loose or detached, especially in areas with strong impact, and whether the belt transmission part is abnormal.

(4) Check if the high-pressure gas source, low-pressure gas source, power supply, and water source are normal.

(5) Check if all emergency stop switches, safety door switches, and protective device detection switches are functioning properly.

(6) Check if the heating head enters the embryo and if the embryo shedding part is working properly. If the insertion is not in place, adjust the nut of the pressing device.

(7) Check if the light tube is damaged or broken. It should be replaced in a timely manner.

(8) Check whether each pneumatic component leaks air and whether the action is sensitive.

(9) Check if there is any abnormal air leakage or blockage in the triple unit, and if the water storage capacity in the cup is too full.

(10) When the solenoid valve of the fully automatic bottle blowing machine encounters abnormalities, it should be cleaned in a timely manner (once every 3.5 million bottles blown).

Taizhou specializes in productionBottle preform moldThe company is undoubtedly Taizhou Huangyan Supa Mold&Plastic Co., Ltd