Semi automatic circular plastic water tank supplier

The circular plastic storage tank water tank includes large plastic containers such as plastic water towers, plastic containers, plastic drums, plastic square boxes, etc. The plastic water tank is mainly made of new specialized rotational molding raw material high concentration polyethylene (LLDPE).

General LLDPE raw materials have the characteristics of environmental protection, acid and alkali resistance, and high and low temperature resistance. The plastic water tank made of LLDPE can reach food grade.

Performance: Smooth inside and outside in one molding process, with good hygiene and UV resistance, impact resistance, strong earthquake resistance, not easy to age, no algae growth, easy to rinse, anti rodent, anti termite, easy to install and move. A typical acid and alkali resistant water tank can hold high-temperature liquids, chemicals, and strong acid and alkali liquids. Generally, it can withstand high temperatures of 90 degrees Celsius and low temperatures of minus 30 degrees Celsius. After adding the formula, it can be heated to over 110 degrees Celsius.

Circular plastic storage tank water tankMaintenance and upkeep:

1. PE plastic water tanks, as devices for storing drinking water, should not be frequently moved or relocated.

2. The inlet and outlet pipes of the PE plastic water tank use rubber flexible joints (expansion joints), and the weight of the connecting pipe should be supported separately and not applied to the water tank. It can prevent the occurrence of expansion, contraction, unbalanced load, and shock resistance of pipes.

3. In order to facilitate the inspection of the use of PE plastic water tanks and prevent pollutants from flowing into the PE plastic water tank from the outside, it is necessary to leave a certain space around the water tank to take emergency measures. Impurities and sediment often accumulate inside the box, so it needs to be cleaned regularly.

4. To prevent the expansion, contraction, partial load and shock resistance of the pipes, rubber flexible joints (expansion joints) must be used for the inlet and outlet pipes of the water tank. The weight of the connecting pipe should be supported separately and should not act on the water tank.

5. To avoid damaging the anti-corrosion tank wall with tools, wooden ladders and metal parts should be used. Soft pads should be added to the contact area of the tank wall, and efforts should be made to prevent the inner wall from being scratched or bruised.

6. The external climbing ladder, protective cage, and guardrail of the anti-corrosion storage tank should be carefully checked for reliability before climbing. It is prohibited to climb and use them in case of abnormal situations.

7. When replacing valves, anti-corrosion gaskets, and other accessories, the liquid must be drained before proceeding. If maintenance is required inside the anti-corrosion storage tank, all feeding valves should be closed first, and attention should be paid to ventilation inside the tank. When entering the tank for operation, it is necessary to have a person in charge to carry out the operation under the monitoring outside the tank.

8. Try to keep plastic storage tanks filled with liquid as water can absorb the damage caused by ultraviolet radiation to the tanks.

9. Being able to block the afternoon sunlight as much as possible against the wall, the relative power of ultraviolet rays in the morning is far less than that in the afternoon; Try to wrap the storage tank with some objects as much as possible, which can prolong the service life of the tank.