Salt spray test chamber supplier

NegotiableUpdate on 01/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Which is a good salt spray test chamber? By assessing the salt spray corrosion ability of materials and their protective layers, as well as comparing the process quality of similar protective layers, it can also evaluate the salt spray corrosion resistance of certain products. This product is suitable for salt spray corrosion testing of components, electronic components, metal material protective layers, and industrial products. Model 60, Model 90, Model 120, Model 160

Product Details

salt spray test chamberWhich one is good

Model: DB-Y-60

salt spray test chamberWhich one is goodMain components:

1. AC contactor: Taiwan, China

2. Thermal relay: Taiwan, China, China

3. Communication relay: OMRON,

4. Time relay: Taiwan, China, China

5. Controller: South Korea*

6. Over temperature protector: Taiwan, China

7. Main power switch: Taiwan, China

8. Solid state relay: Taiwan, China, China

9. Button switch: Taiwan, China

10. Dry burn protector: Italy

Which one is goodSupplementary Notes:

Voltage used:

1. Power supply: AC1 ￠ 3W 220V 50/60HZ ※ Voltage fluctuation allowable value: ± 10% of the fixed voltage

2. Maximum load capacity: 3.0KVA

3. Maximum working current: 15A

Water requirements: RO reverse osmosis pure water or distilled water

Usage environment: Allow usage in an environment of 0~30 ℃

Performance guarantee environment: 5~25 ℃

The installation ground should not have obvious inclination

No other items can be placed within 60CM around the instrument

Which one is goodProduct structure:

laboratory	P.V.C plate (Taiwan, China) with thickness of 5㎜Resistant to temperatures up to 80 ℃
sealing cover	Made of acrylic impact resistant board (Mitsubishi, Japan), with a thickness of 6㎜Transparent sealing cover, observe the condition of the tested product during testing
pressure tank	Using high-pressure resistant buckets for insulation effect*

Control Panel

◆ Temperature controller of the laboratory is 0-99.9 ℃, LCD digital display has PID automatic calculation, and control error is ± 0.3 ℃ (YANGMING) (Taiwan, China, China)

◆ Saturated air tank temperature controller 0-99.9 ℃, LCD digital display with PID automatic calculation, control error ± 0.3 ℃ (YANGMING) (Taiwan, China, China)

◆ Heating tank liquid expansion safety temperature controller 0-120 ℃ (Italy c.a.e.m)

◆ Saturated air tank liquid expansion safety temperature controller 0-120 ℃ (Italy c.a.e.m)

◆ Digital display time controller 0.1s-9990hr (YANGMING) (Taiwan, China)

Accumulator 0-9990hr (NATINL TH248) (Japan)

◆ Rocker illuminated buckle switch, capable of continuous buckle locking 20000 times

heating system	Using imported stainless steel finned heat pipe U-Type electric heater to heat the air
shelf	Using a planar indexing frame, the angle can be adjusted freely, and there are many test pieces placed in terms of falling and receiving fog on all sides.

Which one is goodTechnical Specifications：

studio dimensions	600×400×450 mm （L×W×H）
Analysis accuracy	± 0.1℃
control accuracy	± 1.0℃
Distribution accuracy	± 2.0℃
Test Method	1. Salt water spray test: NSS, ACSS (1) Laboratory: 35 ℃± 1 ℃ (2) Saturated air tank: 47 ℃± 1 ℃ 2. Acetate salt spray test: NSS, ACSS (1) Laboratory: 50 ℃± 1 ℃ (2) Saturated air tank: 63 ℃± 1 ℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3 3. Copper speed test: CASS (1) Laboratory: 58 ℃± 1 ℃ (2) Saturated air tank: 65 ℃± 1 ℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3, and mix with 0.02~0.025% copper chloride