Welcome Customer !

Membership

Help

Guangdong Kebao Experimental Equipment Co., Ltd
Custom manufacturer

Main Products:

plast-mach>Products
Product Categories

Guangdong Kebao Experimental Equipment Co., Ltd

  • E-mail

    3068879847@qq.com

  • Phone

    13732586353

  • Address

    No.15 Shihuan Road, Dongcheng District, Dongguan City, Guangdong Province

Contact Now

Explosion proof high and low temperature test chamber supplier

NegotiableUpdate on 01/31
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Explosion proof high and low temperature test chamber, also known as environmental test chamber, tests the heat resistance, cold resistance, and dry resistance of various materials. Suitable for use in factories such as electronics, electronics, food, vehicles, metals, chemicals, and building materials.
Product Details
Explosion proof high and low temperature test chamber

1、 Product Name:Explosion proof high and low temperature test chamber
Product Model: KB-FT-1000D
2、 Product Introduction:Explosion proof high and low temperature test chamberAlso known as environmental testing chamber, it tests the heat resistance, cold resistance, and dry resistance of various materials. Suitable for use in factories such as electronics, electronics, food, vehicles, metals, chemicals, and building materials.


3、 The balanced temperature control system (BTHC) is used to control SSR in a P.I.D. manner, ensuring that the heating amount of the system is equal to the loss amount, thus enabling long-term stable use.


4、 Technical parameters
Inner box size: W × D × H: 1000 × 1000 × 1000 (mm)
Temperature range: -45 ℃~+100 ℃
Temperature deviation: Temperature ≤ 0.5 ℃ min
Uniformity of fabric: Temperature ± 1.0 ℃

Heating rate: average 3 ℃/min, non-linear no-load drop:
Average temperature rate of 3 ℃/min, non-linear no-load
Temperature limit: high temperature+100 ℃ low temperature -45 ℃


5、 Product Structure

Inner box material: SUS # 304 stainless steel coated with PTFE
Outer box material: Steel plate baked paint
Insulation material: Hard Polyurethane foam
Tightening: Silicone foam tightening 1 strip
Heater: stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China, China
Note: Install a pressure relief hole and a water spray device
Wind turbine: 1 Motor 2 Stainless steel extended axis 3 Multi blade aluminum alloy wind turbine (SIROCCO FAN) 4. Special adjustable hundred page air supply circulation system
Box door, single door, double-layer door, embedded non reactive flat handle  Four layer vacuum tempered glass enlarged window  Electric heating automatic defogging, equipped with LED light strip  Equipped with explosion-proof chain, explosion-proof chain added to the door

6、 The refrigeration system adopts multi-stage automatic load capacity adjustment technology, which is more efficient and energy-saving
Compressor: Emerson Vortex Compressor from the United States
Condenser: fin type attached platform dispersing hot air fan
Evaporator: finned multi-stage automatic load capacity adjustment
Expansion valve: Danfoss imported components from Denmark
Refrigerant: New environmentally friendly refrigerant R404A imported from the United States
Refrigeration accessories: desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported