Quotation for selling chlorine moisture analyzer TMA-204-W

German CMC electrolytic chlorine moisture analyzerTMA-204-W technology features:

Suitable for moisture analysis of corrosive gases and flammable gases

Measurement method, no need for recalibration, regenerate sensor electrode film layer if necessary

Ultra fast response

high sensitivity

Fully microprocessor controlled

Automatic range switching

Instrument startup self-test function

Compliant with NAMUR standards

German CMC electrolytic chlorine moisture analyzerTMA-204-WAnalysis principle:

The pentoxide phosphorus sensor uses the principle of electrolyzing water molecules into hydrogen and oxygen. This sensor consists of a glass cylinder and two parallel electrodes. The electrode material is selected according to the specific application (usually made of platinum or rhodium metal wire), and a thin layer of phosphoric acid H3PO4 film is coated between the two electrodes. The electrolysis current appearing between the two electrodes decomposes the water in the acid into H2 and O2. The final product of this process is pentoxide phosphorus, which is a highly hygroscopic substance. Therefore, water is absorbed from the sample gas. Through a continuous electrolysis process, a balance is established between the water content of the sample gas and the water content after electrolysis. The electrolysis current is proportional to the water content in the sample gas, and the signal passes through the instrument. Signal amplifier processing, followed by display and data readout. This principle is suitable for analysis Xe、Ar、Kr、He、D2、F2、N2、H2、O2、O3、HBr、PH3、SF6、Freon、C2H2、CO2、CH4、Natural gas， Especially suitable for measuring trace moisture in high-purity acidic gases such as Cl2, HCl, SO2, H2S, etc. (except for a few gases that undergo chemical reactions with phosphoric acid).

German CMC electrolytic chlorine moisture analyzerTMA-204-WTechnical Specifications:

Range: 0-10ppm/100ppm/1000ppm/2500ppm (automatic range)

Accuracy: 1% of the full range

Sensitivity: 0.1% of the full range

Analog output: 0/4-20mA or 0-10V

Alarm output: 2 alarm relay outputs

Display: LCD display with background light

Sample gas flow rate: 20Nl/h

Suggested pressure: 0.1-0.5 barg

Sample gas temperature: 5-150 ℃

Response time:<1 second<>

T50 response:<8 seconds<>

Environmental temperature: 5-65 ℃

Cable: Standard configuration of 3 meters, optional length of 300 meters

Size:

Width 300mm x Height 260mm x Depth 280mm