HK-0687Aircraft fuel lubricity tester

Overview narrate, recount, state

HK-0687Aircraft fuel lubricity testerAccording to the requirements of SH/T 0687 test method, the lubricity of the sample is measured by the diameter of the wear marks generated on the test ball.

Product Features

1. Standard configuration

Technical Specifications

1. ElectricitySource: AC 220V ± 10% 50Hz

2. Sample volume: (50 ± 1) ml

3. Sample temperature: (25 ± 1) ℃

4. Air humidity: (10 ± 0.2)%

5. Test time: ≤ 30 minutes

6. Column rotation speed: (240 ± 1) r/min

1. Equipment Usage: Used for lubricity analysis of aviation kerosene

2. Sample analysis scope: aviation kerosene

3. Equipment on-site working environment conditions

3.1 Electrical installation conditions:

3.1.1 Power Supply: 220V (Fluctuations:- 10% to+10%), 50Hz

3.1.2 Power: 200W

3.2 Environmental Requirements:

3.2.1 Working environment temperature: Operating room temperature: 15 ℃ to 35 ℃

3.2.2 Working humidity: 20% -80%, no condensation water

3.3 Air source requirements: Air flow rate of 4L/min, Pressure range of 1.5 to 2barWater content less than 50ppm, containIf the oil content is less than 0.1ppm, a steel cylinder gas supply source or a laboratory air compressor can be used.

4. Occupation space: Width 550 x Depth 560 x Height 410mm

5. Working hours: Can work continuously

6. Dimensions: Length x Width x Height 550 x 590 x 410mm

7. Weight: 33Kg8. Other essential items for testing: ultrasonic wave cleaning machine, dryer, oneSecondary nitrile gloves, dust-free paper Isooctane (analytical grade), Isopropanol (analytical grade), Copper Propionate (analytical grade)