Production of PE carbon spiral reinforced pipes

NegotiableUpdate on 01/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Configure a polyolefin specific single screw extruder with features such as high-speed extrusion and high-speed acceleration

Product Details

Configure a polyolefin specific single screw extruder with features such as high-speed extrusion and high-speed acceleration.
Specialized separation type mixing screw and spiral structure head, with reasonable flow channel and smooth inner and outer walls of the pipe.
Specially designed sizing cooling method: production range of 50-200mm, production speed up to 0.6-1.5m/min

Extrusion Machine	SJ-90/30B	SJ-65/30B
aircraft nose	ф50-200	ф50-125
Fixed diameter water tank	SGZL-200	SGZL-125
traction machine	SLQ-200	SLQ-200
Winding machine	SQ-200	SQ-200

Standard designed pipe head
Spiral distribution type fluid separator, with a large flow space, ensures that the melt has sufficient residence time.
The design of low melting temperature results in low internal stress of the pipe and smooth inner and outer surfaces.
Highly flexible, suitable for co extrusion of all polyolefin materials, capable of extruding two-layer and three-layer spiral reinforcement tubes for different specifications.
The copper spiral sizing sleeve with optimized design is equipped with a pre cooling device and a strong vacuum suction device at the inlet end, which is suitable for high-speed extrusion of the pipe material.
Specially designed sprinkler heads provide efficient spray cooling.
Vertical movement motor adjustment, three-dimensional adjustment can be achieved up, down, left, right.
The box is made of stainless steel.
Efficient water pumps and special spray heads provide efficient spray cooling.