Price of wear-resistant fluoroplastic chemical pump

Energy saving and high-temperature resistant chemical pumpIt is an energy-saving pump jointly designed by the whole country. The performance and technical requirements of the pump are designed according to the performance and size specified in the international standard ISO2858. Its advantages include a reasonable layout of the entire series of hydraulic performance, a wide range of user choices, a "rear opening" structure, easy maintenance, and efficiency and suction reach international standards. Widely used for industrial and urban water supply and drainage, and can also be used for irrigation and drainage in farmland and orchards, for transporting clean water or other liquids with physical and chemical properties similar to clean water.

installation sequence
1. Place the unit on a foundation with embedded anchor bolts, and place pairs of wedge pads between the base and the foundation for alignment.
2. Release the coupling. Place a spirit level on the pump shaft or base, adjust the gasket, align the level of the unit, and tighten the anchor bolts appropriately to prevent movement.
3. Pour concrete into the base and anchor bolt inspection holes.
4. After the concrete dries up, the anchor bolts should be tightened and the flatness of the pump shaft should be rechecked.
5. After connecting the pipeline and determining the direction of rotation of the prime mover, connect the coupling and double check the concentricity of the shaft. Measure the difference between the outer circumference of the coupling, which should not exceed 0.1mm. The gap between the two coupling end faces should not exceed 0.3mm between the largest and smallest within one week
6. After 3-4 hours of actual operation of the unit, conduct a final inspection. If there are no defects, the installation is considered qualified.

Energy saving and high-temperature resistant chemical pumpNotes:

Extend service life

In order to ensure the normal operation of the pump, it is important to develop good habits of inspection and maintenance every day. This can avoid many troubles and also improve work efficiency. Therefore, daily inspection and maintenance are very important and cannot be ignored.

environmental quality

Although the operating environment of pumps in our country is constantly improving, there are still some people who place pumps in poor environments. However, if they are placed in places with poor conditions, they should be cleaned regularly. In this case, it is even more important to regularly inspect and maintain them.

routine inspection

In daily inspections, in addition to fully controlling the operation and testing instruments of chemical pumps, it is also necessary to exert human subjective initiative. Check whether the pressure, current, voltage, flow rate, temperature indicated by each part of the instrument are normal, whether there is deformation, variation, and whether there are leaks, blockages, etc; Listen for any abnormal sounds from various parts, such as impact, breakage, friction, etc., and also pay attention to whether the vibration of the chemical pump is very loud.

number of inspections

To ensure work efficiency when using chemical pumps, it is necessary to check them at least twice a day. Even pumps with high automation levels require regular inspections.