Price of supply sealing machine system

NegotiableUpdate on 03/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The single station high vacuum sealing machine system is mainly used for oxygen free and anhydrous vacuum sealing preservation of samples and high-temperature solid-phase synthesis. The entire system consists of a vacuum sealing machine, a hydrogen oxygen flame machine, a vacuum system, and quartz tube machine tube joints. Standardized customized quartz tubes and quartz columns ensure the coordination of other specially designed tube joints, improving the sealing performance of quartz tube packaging and achieving higher standards of vacuum sealing.

Product Details

Single station high vacuum sealing machine systemAdvantage:

Quartz tube and built-in quartz column are welded at high temperature, standardized treatment, and good repeatability.

The quartz tube is automatically rotated with a dynamic sealing system, which is easy to operate and evenly heated.

The vacuum system is equipped with a side suction device to prevent powder materials from entering the vacuum pump and extend the service life of the vacuum pump.

The hydrogen oxygen machine uses electrolyzed water gas, which is produced and used immediately, with a high safety factor.

This device is standardized in operation, ready to use, simple and convenient.

Technical Specifications:

Single station sealing machine	rotation speed	0-30rpm
	Main parameters	Quartz tube specification: Φ 10/15/20/45 * 170mm (other special requirements can be customized) Quartz tube wall thickness: 1.5-2mm (depending on flame size) Inflatable interface: Φ 3/6mm Whole machine leakage rate 2 * 10-10Pa.M3/s Vacuum degree: 10-1. If higher vacuum degree is required, a molecular pump (10-4-10-5Pa) needs to be configured Vacuum pipeline interface: KF16
	structure	The device is designed with a vertical structure
	Overall dimensions	600mm(L) ×260mm(W) × 290mm(H)
	voltage	220V 50Hz
	Net weight	15Kg
Hydrogen oxygen flame machine	Introduction	Easy to operate:No gas cylinders are needed, as long as there is water and electricity, gas can be supplied. Therefore, gas can be supplied anytime, anywhere, without being limited by time and space. On demand gas supply:Turn on the power switch for 10 seconds to supply gas, produce as much as needed. When there is a lot of gas, the gas production will automatically stop. When the gas is not enough, it will automatically turn on to produce gas. Non toxic and odorless:Hydrogen and oxygen are both non-toxic and odorless gases, with no risk of poisoning Operational safety:The gas produced by the hydrogen oxygen flame machine is produced and used simultaneously without storage, The gas supply pressure is below 0.1Mpa, so all the gas produced is used up, unlike gas cylinders which are stored under high pressure. Even with such a safe machine, we have installed six additional flame arresters: the first one is a flame arrester installed on the flame gun, the second one is a flame arrester installed on the pipeline, the third one is a flame arrester installed inside the machine, the fourth one is a one-way valve installed inside the machine, the fifth one is an explosion-proof membrane, and the sixth one is a pressure relief valve. Variable temperature characteristics:The flame temperature can reach up to 2800 degrees and has variable temperature characteristics. When the temperature of the heated object exceeds 2800 degrees, the flame temperature also increases. For example, the hydrogen oxygen flame can melt tungsten. 火力集中：The firepower of the hydrogen oxygen flame machine is concentrated without divergence, with fast heating speed and high operational efficiency. Catalytic characteristics:Hydrogen oxygen flame can catalyze the combustion of other solids, liquids, and gases, such as waste incineration to eliminate dioxins, and boiler combustion to eliminate waste smoke. Multiple safeguards:The machine is equipped with leakage protection, overcurrent protection, over temperature protection, water shortage protection, and overvoltage protection.
	model	OKFKJ-1000
	Power input voltage(V)	220 50/60HZ
	power(W/h)	3500
	Types of electrolytic power sources	Efficient electrolytic power supply
	gas production(rise/time)	0-1000(0-100% infinitely adjustable)
	Raw material (water)	Purified water or distilled water
	Working Voltage	35V
	operating current	83A
	Hydrogen oxygen ratio	2：1
	work pressure(kg/cm2)	0.9
	pressure protection(kg/cm2)	2
	water consumption(L/h)	0.5
	Electrolyte capacity	13Kg
	security level	IP21S
	Water supply mode	manual
	size- LxWxH (mm)	620505725
	gross weight(kg)	70
vacuum system LVU-110	housing size	600 (L) x 600 (W) x 750(H)mm
	Maximum carrying capacity	1000 Lbs
	mechanical pump	Extraction rate:10m³/h Oil capacity: 1.1L Motor power: 400W Ultimate pressure: 6 × 10-2Pa
	molecular pump	Extraction rate: 100L/S Ultimate pressure: 6 × 10-6Pa Start time:<2 minutes Rated speed: 4300 revolutions per minute Cooling method: ambient temperature 5-32℃When it comes to air cooling; 5-40℃Time wise, water-cooled.
	Molecular pump controller	Voltage: 220V ± 22V Starting current: ≤ 7A Input frequency: 47HZ-63HZ Maximum output power: ≤ 150W Maximum acceleration voltage: ≤ 40V Acceleration time: ≤ 3min Frequency (dual speed): High speed 705Hz ± 10Hz Low speed 430Hz ± 5HZ
	Composite vacuum gauge	Measurement channels: 2 channels (1 resistance gauge and 1 ionization gauge) Working mode: manual/automatic (switchable) Resistance unit parameters Regulatory model: ZJ-52T resistance gauge Measurement range: 1.0 × 105Pa~1.0 × 10-1Pa Effective range: 2.5 × 103Pa~5.0 × 10-1Pa Control range: 2.5 × 103Pa~5.0 × 10-1Pa Ionizing unit parameters Regulatory model: ZJ-27 ionization gauge Measurable range: 5.0Pa~1.0 × 10-5Pa Effective range: 1.0Pa~5.0 × 10-5Pa Control range: 1.0Pa~5.0 × 10-5Pa Regulatory degassing method: Joule degassing Control mode: jog or zone control/with power-off memory Control accuracy: ± 1% Sampling time: 1 second Power supply: 220V ± 10% 50Hz Power consumption: 50W Operating environment temperature: 0 ℃~45 ℃ Humidity: ≤ 85%
warranty period		One year warranty, lifetime technical support. Special reminder: 1. Quartz tubes and quartz columns are consumables.
Application precautions		During the sealing process, the quartz tube is in a negative pressure state During the sealing operation, the flame gun head should be fixed to avoid personal injury.