Price of stainless steel oil drum pump

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PVDF oil barrel pump price: Shanghai Benquan Pump Industry Co., Ltd. is a professional manufacturer of high-quality plug-in barrel pumps. At the beginning of its establishment, adhering to the product tenet of "synchronous barrel pump technology, manufacturing quality barrel pumps", we have produced high-quality barrel pump products.

Product Details

Price of PVDF oil drum pump

Selection of oil drum pump

Flow rate is one of the important performance data for selecting oil barrel pumps, and the required head of the device system is another important performance data for selecting oil barrel pumps. Generally, the head is selected by amplifying the margin by 5% -10%.

Price of PVDF oil drum pump

1. Use specified voltage: The line voltage must not exceed ± 10% of the voltage specified on the nameplate of the pumping pump before use.
2. How to equip: After opening the box, assemble according to the structural diagram, connect the motor (1) and then connect (2) to integrate the pump body with the motor (3), and connect the water outlet pipe
3. Before use, check that all components are in good condition before starting up for use.
4. This pump is not suitable for idle operation. When in use, stop the pump immediately after suction is complete, otherwise it will accelerate the wear of impeller seals, bearings, and other components. It is also possible to wear out the pump tube, as the no-load speed of the pump motor can reach 10000 revolutions per minute.
5. Replace the brushes in a timely manner. When the brushes are worn out and cannot be used, they must be replaced in a timely manner (both brushes should be replaced at the same time). Otherwise, poor contact between the brushes and the commutator may cause ring damage, damage the commutator, and in severe cases, burn out the armature.
6. Do not use in the following situations. If insulation damage, cable sheath rupture, plug and socket cracking or poor contact, intermittent operation, severe sparks or other faults are found during use, repair should be carried out immediately when operating the motor casing. Do not use until repaired.
7. To prevent overload, in case of abnormal or reduced speed during use, the machine should be stopped immediately to check if there are any debris stuck in the impeller or if the motor has malfunctioned. When the pump brakes due to a problem, the power must be cut off immediately.
8. Use tools with care, and handle all coating pumps with care to avoid impact.