Price of corrosion-resistant high viscosity oil drum pump

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PVDF oil barrel pump manufacturer Shanghai Benquan Pump Industry Co., Ltd. is a professional manufacturer of high-quality plug-in barrel pumps. At the beginning of its establishment, adhering to the product tenet of "synchronous barrel pump technology, manufacturing quality barrel pumps", we have produced high-quality barrel pump products. Shanghai PVDF oil barrel pump supply, all barrel pump products adopt unsealed pump tube technology, without considering the corrosion of liquid on the sealing ring; The segmented modular pump tube design technology makes the use, disassembly, and maintenance of the pump very simple, and no auxiliary tools are needed to replace any components.

Product Details

PVDF oil drum pump manufacturer

The application of various materials such as polypropylene (PP), polyvinylidene fluoride (PVDF), stainless steel 304, and stainless steel 316L in pump tubing makes it easy and reliable to transport liquids with low to medium viscosity, and generally corrosive to highly corrosive, meeting over 80% of applications. Pump tube lengths of 700mm, 1000mm, 1200mm, 1500mm, 1800mm, customized non-standard. Low viscosity pumps are suitable for transporting thin, neutral, corrosive, and highly flammable liquids. Such as acetic acid, ammonia, chromic acid, formic acid, liquid fertilizers, fruit acid, hydrochloric acid, nitric acid, phosphoric acid, potassium hydroxide, soda water, sulfuric acid; Diesel, fuel oil, hydraulic oil, low flammability liquid, soap liquid, liquid wax, water; Acetone, methanol, synthetic resin, oil, gasoline, solvents, acids and bases; And applicable to the food, cosmetics, and pharmaceutical industries.

PVDF oil drum pump manufacturer

1. Use specified voltage: The line voltage must not exceed ± 10% of the voltage specified on the nameplate of the pumping pump before use.
2. How to equip: After opening the box, assemble according to the structural diagram, connect the motor (1) and then connect (2) to integrate the pump body with the motor (3), and connect the water outlet pipe
3. Before use, check that all components are in good condition before starting up for use.
4. This pump is not suitable for idle operation. When in use, stop the pump immediately after suction is complete, otherwise it will accelerate the wear of impeller seals, bearings, and other components. It is also possible to wear out the pump tube, as the no-load speed of the pump motor can reach 10000 revolutions per minute.
5. Replace the brushes in a timely manner. When the brushes are worn out and cannot be used, they must be replaced in a timely manner (both brushes should be replaced at the same time). Otherwise, poor contact between the brushes and the commutator may cause ring damage, damage the commutator, and in severe cases, burn out the armature.
6. Do not use in the following situations. If insulation damage, cable sheath rupture, plug and socket cracking or poor contact, intermittent operation, severe sparks or other faults are found during use, repair should be carried out immediately when operating the motor casing. Do not use until repaired.
7. To prevent overload, in case of abnormal or reduced speed during use, the machine should be stopped immediately to check if there are any debris stuck in the impeller or if the motor has malfunctioned. When the pump brakes due to a problem, the power must be cut off immediately.
8. Use tools with care, and handle all coating pumps with care to avoid impact.