Price of cable natural ventilation aging box

K-WKL-BNatural ventilation aging chamber

1Natural ventilation aging chamberworking principle

This machine complies withJB/T4278.6-2001Standard for natural ventilation thermal aging test chamberIEC60811-1-2Thermal aging test methodGB/T2951.12-2008TheJB/T7444TheGB/T2951.31.8.1.1Waiting for standards.

Commonly used for hot air aging testing of rubber products, cable and optical cable insulation and sheath, and other materials. Temperature control adopts digital displayPIDThe automatic temperature controller can set the working temperature arbitrarily and automatically maintain a constant temperature, allowing for natural convection of hot air and promoting rapid aging of the sample under constant temperature conditions. The host structure, instruments, and materials were designed after detailed research on the airflow and temperature inside the box, and have the advantages of sensitive temperature control, good temperature uniformity, large effective space, and stable performance.

IINatural ventilation aging chamberMain technical parameters

1Effective size of studio（L*W*H）：450*450*500mm

(Inner box)550*450*550mm）Other specifications need to be customized

2Studio material:SUS304Stretching stainless steel1.2mm External box electrostatic spraying

3Insulation material: high-quality insulation asbestos

4Temperature control range: room temperature25℃~300℃

(Heating at room temperature)300Approximately ℃40minute

5Temperature fluctuation: ±0.5℃

6Temperature uniformity: ±2%

(According toJB/T4278.6standardWorkplace measurement can achieve ±2℃）

7Wind speed:0.5m/s

8Ventilation rate:8~20time/h

9Ventilation method: natural ventilation

10Circulation method: Natural ventilation circulation (bottom intake, top exhaust)

Upper air outlet5One (adjustable) Below the air intake 1a(non-adjustable)

11Power supply:220v±20v 50Hz±0.5Hz

12Power:3 kw

13Self weight approximately:160kg

IIINatural ventilation aging chamberAuxiliary structure

1Sealing: A double-layer high-temperature and high tension sealing strip is used between the door and the box body

To ensure the airtightness of the testing area
2Door handle: Adopting a non reactive door handle for easier operation

3The observation window adopts multi-layer insulated tempered glass（Clear observation of the experimental process

4、 Installation site

1The ground around the equipment is flat and there is no strong vibration

2There is no strong electromagnetic field around the equipment

3There are no flammable, explosive, corrosive substances or dust around the equipment

5、 Installation requirements

1The space on both sides of the device needs to be kept at least60cm

2The front of the device needs to maintain a space of no less than120cm

3The tilt angle of the equipment cannot exceed15°

six、Main configuration list