Price for supplying particulate filters

Particle removal filtration

500, 1000, and 1500Bag Filter

material

Filter material: Supor membrane (hydrophilic polyether sulfone)

Shell, ventilation holes and carrier material: polypropylene

Sealing technology: thermal bonding

Dust cover: polycarbonate

aperture size

0.1/0.1, 0.2/0.2, 0.8/0.2, and

0.8/0.45um

Effective filtration area

AcroPak 500 series: 500 cm2

AcroPak 1000 series: 1000cm2

AcroPak 1500 series: 1500 cm2

size

Diameter: 6.9cm (2.7in.)

Total length (without dust cover)

500 series products: 14.5cm (5.7in.)

1000 series products: 19.3cm (7.6in.)

1500 series products: 22.9cm (9.0in.)

Entrance/exit connection

AcroPak 500 and 1000 series products:

6.4-12.7mm (1/4-1/2-inch) hose,

Wear protective cover.

AcroPak 1500 series products:

12.7mm (1/2-inch) straight pipe interface, outlet

There is no dust cover on the mouth.

Typical residual volume of samples

(Blowing air at a pressure of 10psi)

500 series product: 30ml

1000 series products: 45ml

Large operating temperature

At 2.1 bar (210kPa, 30psi), it is

60°C (140°F)

High operational pressure

Continuous: 4.1 bar at ambient temperature

(410kPa，60psi)

Recommended integrity check small bubble point - water

0.2um: 3.5bar(350kPa、51psi)

0.45μm: 1.7bar (170kPa， 24psi)

60% IPA/40% water (v: v)

0.1μm: 2.4bar (240kPa， 35psi)

Typical water flow rate

bacterial retention

The membrane with a pore size of 0.1/0.1 μ m has achieved the desired results

A. Laidlawii has a low retention rate of no less than 107 cfu/cm2 (according to ASTM F38-83 current process).

All 0 The membranes with a pore size of 2 μ m have achieved the desired results

B. The low retention rate of diminuta bacteria shall not be less than 107rcfu/cm2 (according to ASTM F38-83 process).

When using horseshoe crab deformed cell lysate (LAL) for endotoxin level detection, it should be less than 0.25eu

Passed the United States Pharmacopeia (USP) biological reaction test

测 “In Vivo”<88>。

disinfect

Sterilization by gamma rays; If necessary, you can useUse the previous temperature range of 121-123 ° C (250-253 ° F)Sterilize under high pressure once, usually for 20 minutesThe clock.

High processing capacity and fast flow rate.

Suitable for solutions that require low protein adsorption.

The built-in pre filtration membrane increases the processing capacity, therebySaved costs.

Reliable integrity testing to ensure sterilizationFilter.

Through AcroPak capsules with 0.1 μ m Supor membraneUse a filter to ensure the removal of mycoplasma.

Oxyacetylene welding components can reduce extractable substances.

Eliminating possible EtO residues through gamma ray sterilizationPollution caused by objects.

Particle removal filtrationApplication:

Large volume culture medium filtration.

Pilot scale production.

Liquids that require pre filtration, such as those containingThe medium of milk slurry.

Sterilization and filtration of buffer solution.

Remove mycoplasma through a 0.1 μ m membrane.