PET/PVC ABS/PS electrostatic sorting machine

NegotiableUpdate on 03/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction: This electrostatic sorting machine charges waste through direct conduction. Waste comes into direct contact with a conductive electrode, and waste with good conductivity will receive the same polarity as the electrode and be repelled; Waste or non-conductive materials with poor conductivity are polarized when in contact with a charged drum, generating opposite bound charges near the drum and being attracted by it, thereby achieving the separation of waste materials with different electrical properties. The machine heats the crushed mixed solid waste to a certain extent and feeds it quantitatively into the machine. When the material falls inside the machine, the charged material attracts and repels according to its different conductivity, and falls into different collection tanks. Part of the materials are re charged for secondary sorting, effectively separating solid waste with different conductivity.

Product Details

PET/PVC ABS/PS electrostatic sorting machine

Scope of application

◆mixPET/PVC

◆mixABS/PS/HIPS refrigerator material

◆Mixed flame retardantABS/flame retardant PS

◆mixPC/PMMA

Product Description

This electrostatic sorting machine charges waste through direct conduction, where the waste comes into direct contact with a conductive electrode. Waste with good conductivity will receive the same polarity as the electrode and be repelled; Waste or non-conductive materials with poor conductivity are polarized when in contact with a charged drum, generating opposite bound charges near the drum and being attracted by it, thereby achieving the separation of waste materials with different electrical properties. The machine heats the crushed mixed solid waste to a certain extent and feeds it quantitatively into the machine. When the material falls inside the machine, the charged material attracts and repels according to its different conductivity, and falls into different collection tanks. Part of the materials are re charged for secondary sorting, effectively separating solid waste with different conductivity.

Technical Features

◆Production capacity: 500-2000KG/H

◆The accuracy (purity) of single sorting of crushed particles can reachOver 95%, the second and third sorting can approach 98%

◆Dry separation mode, no three wastes generated, no environmental pressure, fully complies with the requirements of the new environmental protection law.

◆The particle size of the material has a strong selectivity for voltage, and the number of voltages varies for different particle sizes during separation. Therefore, it is necessary to crush the material before entering the main separation machine to achieve the desired separation effect.

◆The size requirement for crushed materials is loose,Crushed pieces below 20MM can easily pass through the machine.

◆If there are more powders and films in the crushed material, additional screening and film removal devices can be added.

◆The complete set of equipment is a modular structure with a small footprint, approximately50 square meters.

◆Each part of the motor adopts Siemens motor or Dongguan motorMotor, branded motor, powerful and of good quality

◆Independently control the electrical box to protect the safe operation of the machine