The unorganized VOCs online monitoring system in the factory adopts a 7-inch industrial large screen LCD display, full touch operation, and clear and detailed display content; Embedded 32-bit ARM architecture processor, equipped with real-time operating system and rich embedded software, completes functions such as detector signal sampling, real-time data calculation, display control, system fault detection, alarm prompt, peripheral driver, etc.
Product Introduction:
Online monitoring system for unorganized VOCs in the factory boundaryAdopting a 7-inch industrial large screen LCD display with full touch operation, the display content is clear and detailed; Embedded 32-bit ARM architecture processor, equipped with real-time operating system and rich embedded software, completes functions such as detector signal sampling, real-time data calculation, display control, system fault detection, alarm prompt, peripheral driver, etc.
The gas detection system consists of a main control board, a preprocessing device, a gas detection module, a TFT touch screen display, an air pump, a switch power supply, and a casing; Adapt to different on-site situations; Its design follows national standards, with advantages such as fast response speed, strong anti-interference ability, high reliability, and easy maintenance.
Online monitoring system for unorganized VOCs in the factory boundaryProduct Features:
High performance sensors with high measurement accuracy, good stability and repeatability, and long service life;
7-inch large screen LCD display, rich display content, clear screen;
◆ Equipped with historical recording function, able to record alarm information;
The MCU memory stores 10000 pieces of historical data.
◆ Equipped with an embedded 32-bit ultra-low power processor and signal processing algorithms, the response speed is fast;
◆ It has functions such as automatic testing self check, fault alarm, screen display, and result query;
Touch operation, easy to operate, simple to use;
◆ It can display gas concentration curves and provide detailed information on the process of gas changes;
◆ Adopting a long-life pump, it can work continuously for more than 10000 hours;
◆ Automatic fan heat exhaust function;
An excellent front-end pre-processing system that can dry and filter the detected gas. Ensure more accurate gas detection, more stable use, and effectively extend the lifespan of sensors;
All gas pathways are made of corrosion-resistant materials to avoid the adverse effects of corrosive gases;
All interfaces use components with excellent airtightness to ensure the effectiveness of gas detection;
◆ Equipped with GPRS and GSM wireless functions;
◆ Easy to install and use;
Technical Indicators:
| name |
description |
| Gas detection: |
VOCs; |
| Detection principle: |
Photoionization; |
| Detection method: |
Pump suction; |
| Display mode |
7-inch LCD color screen display; |
| Display unit: |
ppm,mg/m3; |
| Measurement range: |
0-500mg/m3; (Optional) |
| resolving power: |
0.1mg/m3; |
| Accuracy: |
≤±3%FS; |
| Operation method: |
Touch operation; |
| warm-up time |
≤ 90 seconds; |
| Response time: |
T90 ≤ 90 seconds; |
| Output signal: |
GPRS 4-20MA RS485 |
| Main material |
SPCC cold-rolled sheet; |
| Operating Temperature |
-40℃~+60℃; |
| Working humidity: |
≤95%RH, No condensation; |
| Supply voltage: |
AC220V±15% 50Hz±1%; |
| Power consumption: |
<15w; <>
|
| working pressure: |
86-106KPa; |
| Installation method: |
Wall mounted installation, pole mounted installation |
| Protection level: |
IP54; |
| Size: |
530mm * 400mm * 260mm (length * width * thickness); |
| Weight: |
About 15Kg; |
| Execution standard: |
GB16808-2008; |