Oil temperature machine production

Explosion proof oil temperature oil circulation heating machineThe main feature is that it can achieve room temperature to 300 ℃ at lower operating pressures, with a large pump flow rate and high heating power. It is also known as explosion-proof mold temperature machine or explosion-proof electric heating heat transfer oil furnace, and is widely used in production environments where flammable and explosive gases may exist in industries such as marine engineering, petroleum, chemical engineering, scientific research institutions, and power.

Product model: TOB-FB

Temperature range: Room temperature~300 ° C

Heat transfer medium: heat transfer oil/heat transfer oil

Temperature control accuracy: PID ± 1 ℃

Explosion proof grade: EXd Ⅱ BT4

Power supply selection: 3-phase 380V 50HZ

Heating power: 18kw~360KW optional

Explosion proof oil temperature oil circulation heating machineIn work, low-temperature fluid medium enters its input port through a pipeline under pressure, follows a specific heat exchange channel inside, and uses the principles of fluid thermodynamics to design a path that takes away the high-temperature thermal energy generated by the electric heating element during operation, causing the temperature of the heated medium to rise. The high-temperature medium required by the process is obtained at the outlet of the mold temperature machine.

Security protection system:

Lack of media - oil shortage alarm indication

Phase sequence detection - phase loss and reverse phase alarm indication

Pump overload - pump overload alarm indication

Stuck alarm - abnormal heating alarm indication

Pipeline blockage - BY-PASS pressure relief circuit

Exhaust function - automatic (manual) exhaust

Pressure monitoring - Stop heating due to abnormal pressure

Abnormal temperature - automatic power cut-off due to overheating

Power short circuit - air switch tripping power-off protection

Emergency stop switch - emergency stop button

The internal control system of the cyclic explosion-proof mold temperature machine automatically adjusts the output power of the electric heater based on the temperature sensor signal at the output port, making the medium temperature at the output port uniform; When the heating element exceeds the temperature limit, the independent overheating protection device of the heating element immediately cuts off the heating power supply to prevent the heating material from overheating and causing coking, deterioration, carbonization, and in severe cases, burning out of the heating element, effectively extending the service life of the electric heater.