Microcomputer controlled electro-hydraulic horizontal tensile testing machine

NegotiableUpdate on 04/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 100 ton horizontal tensile testing machine is mainly used for testing the tensile and compressive mechanical properties of components such as steel wire ropes, anchor chains, steel strands, oil lifting rods, cables, and chain belts. Maximum test force: 1000KN. This machine adopts a tabletop structure, with a single output rod and double acting piston cylinder applying test force. The computer control system controls the entire test process, and the test data is measured by a load sensor and transmitted to the computer. The software system displays the test force and piston displacement in real time, and can automatically analyze, process, and store the test results. The printer directly prints the test report.

Product Details

100 ton horizontal tensile testing machine

1、 Product Introduction:

100 ton horizontal tensile testing machineIt can be used for stretching long specimens of various metal materials, steel wire ropes, bolts, steel cables, chains, lifting belts, etc. It is widely used in the fields of metal products, building structures, ships, etc. The microcomputer controlled electro-hydraulic servo horizontal tensile testing machine adopts our company's mature testing machine technology, and adds a steel frame structure to change the vertical test to a horizontal test, which increases the tensile space (can be increased to more than 20 meters, which cannot be achieved by vertical testing), meeting the testing needs of large and full-size specimens.

This testing machine adopts a frame structure of welded steel plates as a whole, with a single output rod and double acting piston cylinder to apply test force, load sensors to measure force, and adjustable tensile space according to the sample size and length. The computer screen displays the test force and experimental curve, and automatically processes the test data according to the requirements of the test method. This machine is an ideal inspection equipment for coal power enterprises, coal mining machinery and equipment, safety production inspection institutes, technical supervision and other industries. It is suitable for tensile load and failure tests of products such as wires and cables, porcelain bottles, double hooks, steel strands, safety belts, waist ropes, foot buckles, etc. It requires flexible and convenient operation, slow and stable loading, strong body bearing capacity and other advantages.

2、 Related standards:

100 ton horizontal tensile testing machineIt is manufactured according to the GB/T2611-2007 "General Requirements for Testing Machines" and GB/T16491-1996 "Electronic Tensile Testing Machines" standards.

Applicable standards: ASTM, DIN, ISO, JIS, BS, etc.

3、 Product parameters:

Range: 1000kN (size can be customized according to customer requirements)

Resolution: 250000 yards

Measurement range: 10kN to 1000kN

Accuracy level of indication: Level 1

Piston stroke: 1000mm (can be customized according to customer requirements)

Displacement measurement range: 0-1000mm

Displacement resolution: 0.007mm

Displacement accuracy: ± 1%

Test speed range: 0.5-100mm/min

System working pressure: 20MPa

Cylinder diameter: 280mm

Motor power: 5.5kW

Experimental space: 15m

4、 Operation steps

1. Do not click the 'Start' button before starting the experiment.

2. If there is an abnormal prompt or the default load value is different from before every time you enter the program, do not conduct the test and refer to the troubleshooting method for troubleshooting. The load value of the measurement and control system should be around zero every time it first enters the test interface (without zero adjustment).

3. The horizontal tensile testing machine can use the oil cylinder reset button to raise or lower the oil cylinder piston to the set position. When the displacement display position value is greater than the set position, clicking the oil cylinder reset button will cause the piston to lower; On the contrary, the piston will rise. Pay attention to whether the actual position of the piston is consistent with the displacement display position, and avoid blindly using this key to raise or lower the cylinder when it is actually in a high position.

4. After clamping the specimen with the horizontal tensile testing machine, do not adjust the load value to zero again.

5. Install the extensometer and pay attention to removing the locating pin before adjusting to zero; When removing the extensometer, pay attention to inserting the locating pin to prevent damage to the extensometer due to human overload.

6. After the sample of the horizontal tensile testing machine breaks, if the program does not exit the test state and prompts the end of the test, the stop button must be clicked immediately to exit the test state.

7. After completing the experiment and exiting the program, the steel wire tensile machine should be shut down using WINDOWS before cutting off the power supply; Turn off the oil pump and lower the oil cylinder to the bottom.

8. Be careful not to loosen the plug when moving the computer

Friendly reminder:100 ton horizontal tensile testing machineAll products are custom-made, so technical parameters and pictures are for reference only!