Manual for Motor Reluctance Speed Sensor

CS-1 Magnetic Resistance Speed Sensor Speed Probe

I. Overview

Magnetic electric speed sensor uses the principle of electromagnetic induction to achieve speed measurement. It can measure the speed of various magnetic materials such as gears, gear discs, perforated and grooved (concave convex grooves, healthy phase grooves), magnetic steel, optical axis (attached magnetic plates), disks, etc. without power supply or contact, and convert it into frequency signal output (sine wave signal).

2、 Application Fields

Magnetic electric speed sensors can be widely used in large rotating machinery in the power, metallurgy, petrochemical, shipbuilding, and paper industries (such as measuring the speed and overspeed of steam turbines, compressors, motors, fans, pumps, etc.)

3、 Characteristics

No power supply required, simple installation

Non contact measurement

Strong output signal

Strong anti-interference ability

Suitable for harsh industrial environments such as smoke, oil and gas, and water vapor

I. Overview

CS-1Magnetic reluctance speed sensor uses the principle of electromagnetic induction to achieve speed measurement. It can measure the speed of various magnetic materials such as gears, impellers, disks (or shafts) with holes (or slots) without power supply or contact, and convert it into an alternating voltage signal output (approximately sine wave).

2、 Application Fields

CS-1Magnetic electric speed sensors can be widely used for measuring the speed and overspeed of large rotating machinery (such as steam turbines, compressors, motors, fans, pumps, etc.) in the power, metallurgy, petrochemical, shipbuilding, and paper industries.

It has also been widely used in the fields of workpiece processing speed monitoring, steel pipe coating speed monitoring, and gear speed measurement.

3、 Characteristics

1. Strong output signal

2. Strong anti-interference ability

3. non-contact measurement

4. Can work without power supply

5. Can be used in harsh environments such as smoke, oil and gas, water mist, etc

4、 Technical parameters

Measurement range:50～10000r/min（60 Teeth)

Wiring method: Two wire system (passive, no power supply required)

Output waveform: approximate sine wave (≥)50r/minWhen)

Output amplitude:50r/minTime ≥300mV

Operating Temperature-10℃～100℃，-30℃～230℃ (specially customized)

Installation gap:0.5～1mm.

heavy Quantity: Approximately280g

Gear requirement: Number of teeth for speed measurement ≥2(involute gear)

The tested object should beMagnetic materials such as gears, gear discs, perforated and grooved (concave convex grooves, healthy phase grooves), magnetic steel, optical axes (attached magnetic plates), disks, etc.

CS-1 Magnetic Resistance Speed Sensor Speed Probe