Large glass reactor manufacturer

NegotiableUpdate on 03/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SC-1L pilot double-layer glass reactor is made entirely of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene material in contact with the material, which has stable performance and is not prone to chemical reactions with the material.

Product Details

Trial double-layerGlass reaction kettleSC-1L

1、 Working principle

This machine is equipped with an electric constant speed stirring system, a condensation and dropwise addition system, and an external heating or cooling cycle equipment for the interlayer of the kettle body. While stirring the materials, inject circulating hot solution or coolant through the interlayer to heat or cool the materials inside the kettle at a constant temperature. When the material undergoes a heating reaction, the evaporation efficiency can be improved under vacuum conditions (by connecting a vacuum device). The solvent vapor is cooled into a liquid through a glass condenser coil (by connecting a cooling device), which can be refluxed into the kettle or recovered through the lower valve of the reflux elbow. After the reaction is complete, the material can be discharged from the side outlet at the bottom of the kettle.

This series of products requires a system device consisting of vacuum equipment, high-temperature or low-temperature circulation equipment, etc.

IITrial double-layerGlass reaction kettleSC-1LProduct Features

1. All parts in contact with the material are made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene material, which have stable performance and are not prone to chemical reactions with the material.

2. Bottom plate type main body, made of aluminum alloy and stainless steel material.

3. Glass+PTFE discharge valve, no liquid accumulation side discharge.

4. Electronic infinite speed regulation, fine tuned by twisting, with digital display of speed.

5. The mixing system adopts double bearings and double skeleton oil seals.

6. The vacuum pressure gauge displays real-time vacuum and the pointer displays.

7. Crescent shaped stirring blade, made of 304 stainless steel and PTFE stirring blades; The material of the stirring rod is 304 stainless steel, wrapped with polytetrafluoroethylene tube.

8. Fuse safety protection Overload protection

3、 Product image:
中试双层玻璃反应釜

The pictures are for reference only, and the actual supply shall prevail

4Pilot double-layer glass reactor SC-1LTechnical Specifications

model		SC-1L
Capacity of the kettle body		1L inner diameter 120mm outer diameter 150mm inner length 160mm
Mezzanine capacity		About 200ml
voltage frequency		220V/50HZ
Mixing motor power		60W
stirring speed		50-2200rpm/min
speed display		Color large screen display
time display
Torque display
Temperature Display
timing range		0-99h59min
Temperature range of kettle body		-80℃~ +250℃
Temperature measurement accuracy		±1℃
真空度		0.098Mpa
pot lid Φ150mm five mouths	Mixing port	Φ 50mm flange mouth
	Condensation port	24 # label
	Constant pressure funnel mouth	24 # label
	Decompression port	19 # label
	temperature measurement port	19 # label
stirring paddle		Φ 10 × 450H (mm) blade span 80mm
condenser		Φ 40mm × 350H (mm) upper 24 # marking port and lower 24 # marking plug
Constant pressure funnel		200ml upper 24 # standard port with glass stopper and lower 24 # standard stopper
pressure reducing valve		19 # standard plug valve vent nozzle (pagoda joint) with an outer diameter of 10mm
temperature measurement port		19 # standard plug glass thermometer tube
Intermediate inlet and outlet for circulation		Φ 25 flange mouth matching flange, adapter tower joint outer diameter 14mm
feeding port		Wire mouth equipped with PTFE discharge valve inclined discharge nozzle (pagoda joint) with a diameter of 12mm and a ground clearance of 150mm
Vacuum suction head		24 # glass exhaust head nozzle (pagoda joint) with an outer diameter of 10mm
Condenser coil inlet and outlet circulation nozzle		Pagoda joint outer diameter 10mm
Space occupied by the whole machine		450 × 450 × 1050mm width, depth, and height
Net weight of the machine		18KG