K-LDW servo type material tensile testing machine

Wire and cable computer servo material tensile testing machine 10T

Computer servo material tensile testing machine product overview:

The microcomputer based material testing machine is a new type of material testing machine that combines electronic technology with mechanical transmission. It has a wide and accurate loading speed and force measurement range, and has high accuracy and sensitivity in measuring and controlling loads and displacements. The structure is simple and easy to operate, and can be directly placed on the studio floor for testing. Especially suitable for use in testing instruments for controlling product quality on production lines. This series of models is mainly suitable for non-metallic and metallic material testing with test loads below 20KN.

Computer servo type material tensile testing machine equipment usage:
This machine is suitable for various materials and products in the textile, rubber, plastic, synthetic leather, tape, adhesive products, plastic film, composite materials, electronics, metal and other industries to conduct various tests such as tensile, compressive, bending, shear, peel, tear, two-point extension (requiring additional extensometers), etc., to determine the quality of the product.

The product characteristics of the computer servo type material tensile testing machine are as follows:

We use excellent photoelectric encoders for displacement measurement, and the controller adopts an embedded single-chip microcomputer structure with powerful measurement and control software built-in, integrating measurement, control, calculation, and storage functions. It has the function of automatically calculating stress, elongation (with the addition of an extensometer), tensile strength, and elastic modulus, and automatically calculating the results; Automatically record the force or elongation values of large points, fracture points, and points; The experiment process and dynamic display of the test curve are carried out using a computer, and data processing is performed. After the experiment is completed, the curve can be enlarged through a graphics processing module for data reanalysis and editing, and reports can be printed. The product performance reaches the highest level.

The main features of the computer servo type material tensile testing machine are:

1. The appearance adopts a surface cold plate electrostatic spray pattern, which is simple and elegant, and the internal tension and compression are multifunctional and economically practical

2. Force value digital LCD display, which can distinguish tension or pressure, and the LCD interface is clear and easy to read;

3. Three measurement units: N-Kgf Lbf optional and automatically interchangeable;

4. LCD display with backlight illumination, suitable for use in low light environments;

5. Single measurement can read the peak values in both tension and compression directions, and can be automatically and manually reset;

6. Equipped with travel limit and overload shutdown function.

7. The floor standing gantry tensile machine has a beautiful and exquisite structure, and is economical and practical;

Computer servo type material tensile testing machine meets the standards:

GB/T16491-1996 Electronic Testing Machines

Application Industry of Computer Servo Material Tensile Testing Machine:

Widely applicable to wires and cables, hardware, electronic appliances, packaging printing, medical equipment, automotive parts, textiles and leather, clothing and footwear, rubber and plastic products, and higher education institutions; Research laboratory; Various industries such as commercial inspection and arbitration, technical supervision departments, etc. are the basic equipment for quality management and physical property testing

Wire and cable computer servo material tensile testing machine 10T

Computer servo type material tensile testing machine product parameters:

A. The machine allows for a higher load capacity of 5000Kg.

B. Load capacity: Choose from 100, 200, 500, 1000, 2000Kg, or 5000kg or less (Domestic)

C、 Load measurement accuracy: Load element+HZ-2000 display ± 0.5% (0.005-0.1 of full range)

D. Unit switching: Kg, Lb, N

E. Resolution: 1/50000

F、 Displacement resolution: 0.001mm

G. Power system: AC motor, gearbox

H. Control system: Test speed of 50~350 mm/min with stepless speed regulation and 5-speed fixed speed

(50100200300350) or customers.

I、 Data sampling frequency: 200times/sec

J. Joint plate travel: 400, 500, 600mm.

K. Safety devices: overload, emergency stop device, upper and lower travel limit device, leakage protection device.

L. The machine itself is equipped with printing function

M、 It can store 10 test reference point results, automatically calculate their average value, automatically capture the maximum value, and determine the force value at the time of fracture.

N. Display mode: HY-2000 deep blue LCD screen with Chinese display, thin film touch button, and the following functions:

①. Single experiment, manual 10 point statistics, and automatic calculation of average and fracture values;

②. Multi unit automatic switching such as kgf, Lbf, N;

③. Free point selection function;

④. Equipped with multifunctional calibration function;

⑤. Automatic printing function;

⑥. Adopting 24 bit AD acquisition with a resolution of 1/20000;

⑦. Choose any decimal place from 0 to 4 digits;

⑧. The power on password protection function can effectively prevent non operators from turning on the device;

⑨. The breakpoint ratio ranges from 0 to 99%, and users can set appropriate fracture downtime according to different materials.

⑩. Overload protection function can be set to effectively prevent machine overload;

O、 Power supply: AC 220V single-phase.

P、 Power: 0, 75KW (depending on different power requirements, different power motors are standard)

Q、 Machine size: approximately 800 × 650 × 1900mm (length * width * height).

R、 Weight: 150kg

Original configuration:

1 set of stretching fixtures

Scalable configuration:

Fixtures or specially designed fixtures and accessories can be selected based on the test standards or test samples provided by the customer, and the cost will be charged separately.