Integrated PE film extrusion drying and cutting machine

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

When determining the installation position of the integrated PE film extrusion and cutting machine, the position of the transportation channel and sewer pipeline should be considered.

Product Details

　　Integrated PE film extrusion drying and cutting machineTechnical features:

1. Suitable for various types of films and PP woven bags with sediment content up to 80%;

2. Adopting a circulating water system to ensure cleaning effectiveness while controlling water flow and evaporation rate;

3. The core part of the preprocessing module adopts wear-resistant design to ensure long-term continuous operation of the system;

4. The pre crushing and pre washing system efficiently removes most impurities such as sediment, protects subsequent equipment, and greatly improves the service life of the fine crushing and cleaning system;

5. Targeted design of the fine crushing system ensures that the size of the crushed film is uniform and easy to clean;

6. The high-speed centrifugal cleaning system applies corresponding blade impact force to different materials at a suitable rotational speed to achieve cleaning effect;

7. The drum of the cleaning tank is designed for high-pressure underwater cleaning to remove residual impurities to the greatest extent possible; Claw type uniform discharge ensures uniform discharge while controlling moisture content, providing a process foundation for the dehydration module;

The thin film drying technology combining centrifugal dehydration, screw extrusion drying, and high-temperature hot air strictly controls the moisture content of the finished product within 5%, which is suitable for high-quality granulation requirements;

9. Through theoretical calculations and multiple actual measurements, adjustments have been made to the mechanical operation details of the crushing, cleaning, and drying processes to avoid material loss caused by excessive processing;

10. Automated control of the entire line, with interrelated operations between various units of the system, maximizing production capacity while providing predictive functions for possible abnormal situations, ensuring system safety;

11. Corresponding granulation systems can be equipped according to production requirements.

　　Correct installation method

1. When determining the installation location of the PE film extrusion dryer, the position of the transportation channel and drainage pipeline should be considered.

2. The placement of the machine should be able to withstand its weight while ensuring a level placement.

3. Before connecting the power to the machine, control switches should be installed on nearby walls and other areas. Power should be turned on before use and turned off after use. There must be reliable grounding to prevent accidents.

4. Perform trial operation after power connection

5. Immediately turn off the power after connecting it, and check if the rotation direction of the PE film extruder barrel is the same as the direction of the external arrow. If it is opposite, adjust the power supply sequence of the PE film extruder.

　　Operation of integrated PE film extrusion drying and cutting machine:

1. Start. Air compressor, flushing pump, main drive for concentration and compression, with machine running by air.

Start the dosing and sludge non pumping process, compare with the flow meter, and adjust the speed of the dosing pump appropriately to allow the sludge to solidify. This process is based on the initial experimental data, and the actual operation should be adjusted according to the flocculation situation.

Observe the situation of the material entering the mud and adjust the electric valve to control the amount of mud entering

Adjust the flow rate and material plate height, observe the coagulation and gravity dewatering effects, adjust the dosing flow rate, and ensure a small dosing flow rate while ensuring the coagulation effect.

Observe the thickness of the filter cake discharge, the moisture content of the filter cake, adjust the sludge feed rate and the tension of the filter belt, and the operating speed of the filter belt in the concentration and compression section to obtain a large production capacity.