Industrial disc mill

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Industrial disc mill 1. Closed dust treatment, maximizing the reduction of workshop dust. 2. Adjustable electromagnetic vibration feeding ensures more stable current during the operation of the grinding machine. 3. Install a shut-off fan at the discharge outlet of the cyclone separator, and there is basically no dust leakage. 4. Use high-quality bearings, oil seals, and high-quality lubricating grease to ensure long-term normal operation of the equipment. 5. The overall water cooling of the grinding room ensures that the properties of the materials do not change during the crushing process.

Product Details

　　Industrial disc millFeatures:

1. Closed dust treatment can greatly reduce workshop dust.

2. Adjustable electromagnetic vibration feeding ensures more stable current during the operation of the grinding machine.

3. Install a shut-off fan at the discharge outlet of the cyclone separator, and there is basically no dust leakage.

4. Use high-quality bearings, oil seals, and high-quality lubricating grease to ensure long-term normal operation of the equipment.

5. The overall water cooling of the grinding room ensures that the properties of the materials do not change during the crushing process.

6. The production efficiency is high, and the output is significantly higher than that of old-fashioned turbine mills.

7. The door of the grinding room can be opened, allowing for quick cleaning and convenient replacement of moving knives and teeth.

8. High quality accessories, high manufacturing requirements, and strict manufacturing processes ensure equipment quality.

9. Simple structure, reliable and durable. Modular design allows equipment to be installed in different directions according to the size of the workshop.

　　Industrial disc millNotes:

1. During the use of the grinding machine, there should be fixed personnel responsible for supervision, and the operators must have a certain level of technical proficiency. Before installation, necessary technical training must be provided to the operators to enable them to understand the principles and performance of the grinding machine and become familiar with the operating procedures.

2. Due to the fact that grinding machines generally work outdoors and the crushed materials are large ores, the operators of the grinding machine must always pay attention and strictly prohibit metal blocks from entering the machine. If found, stop the machine immediately to remove them, otherwise it will damage the grinding rollers and rings;

3. During the use of the grinding machine, it is necessary to strictly control the moisture content of the material. Materials with high moisture content can easily cause fine powder in the grinding body to occupy the grinding material due to excessive viscosity, seriously affecting the quality and output of the product.

4. It is necessary to add materials according to the prescribed standards, otherwise it will cause uneven particle size, coarse and fine, and affect the grinding effect.

5. To grasp the adjustment of air volume, adjust it appropriately according to the requirements of fineness and output; Whether the air volume is too high or too low, it will have a negative impact on the final Raymond mill performance of the grinding machine.

6. Secondly, after using the grinding machine for a period of time, it should be inspected and repaired. At the same time, vulnerable parts such as the grinding roller, grinding ring, scraper, etc. should be replaced and repaired. The connecting bolts and nuts of the grinding roller device should be carefully checked before and after use to see if there is any looseness and whether the lubricating grease is sufficient.

7. Master the correct shutdown method. Before shutting down, stop feeding in advance. Wait for about a while until there is no remaining material in the grinding machine compartment before cutting off the power. After stopping the grinding work, stop the fan motor to blow away the residual powder.