-
E-mail
1965984483@qq.com
-
Phone
13566166060
-
Address
No. 2, Building 2, Jingye Road, Dongshan Economic Development Zone, Rui'an City, Zhejiang Province
Product Categories
Rui'an Songsheng Machinery Co., Ltd
Hydraulic rocker arm cutting machine
NegotiableUpdate on 03/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1. Equipped with flexible arm rotation and easy material selection operation. 2. High quality seamless steel pipes are used to process the columns, supported by upper and lower holes, ensuring flexible rotation and good reliability of the upper striking plate. 3. Using two handed operation of switches to ensure the safety of operators. 4. The position of the swing arm is adjusted by the handwheel at the top of the machine, and the punching stroke is adjusted by the time timer. This makes it easy to obtain the optimal cutting position, improves work efficiency, and extends the service life of the cutting die and pad. 5. Utilize the inertia energy storage of the flywheel to save energy.
Product Details
1、 Performance: Mainly used for punching vest pockets and flat pockets.
2、 Usage and characteristics:
1The swing arm can rotate freely and the material selection is easy to operate.
2、 High quality seamless steel pipes are used to process the columns, supported by upper and lower holes, ensuring flexible rotation and good reliability of the upper striking plate.
3Using two handed operation of switches to ensure the safety of operators.
4The position of the swing arm is adjusted by the handwheel at the top of the machine, and the punching stroke is adjusted by the time timer. This makes it easy to obtain the optimal cutting position, improves work efficiency, and extends the service life of the cutting die and pad.
5Utilize the inertia energy storage of the flywheel to save energy.
3、 Main technical parameters
|
model |
BX-10T |
|
Total power(KW) |
1.1 |
|
Workbench area（mm） |
710x410 |
|
Weight（kg） |
750 |
|
Pressure（t） |
10 |
|
Overall dimensions(L×W×H)mm |
710x800x1300 |
|
Maximum punching force（KN） |
150 |
|
Swing arm width（mm） |
350 |
|
Stroke adjustment range（mm） |
5-75 |
|
Cutting speed（m/s） |
0.1 |
|
Distance between upper and lower workbenches (without installing cutting pads)mm |
65-150 |
|
Workbench area（mm） |
1000×500 |
|
Motor power（KW） |
1.5 |
