Huarui Instrument Water Absorption Tester with Hammer

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The fine aggregate water absorption tester is suitable for fine aggregates smaller than 2.36mm with a saturation test model. When containing components larger than 2.36mm, such as 0-4.75mm stone chips, it is advisable to use a 2.36mm standard sieve for screening. The part larger than 2.36mm should be measured using T 0308 "Method for Determining Coarse Aggregate Density and Water Absorption", and the part smaller than 2.36mm should be measured using this method. Fine aggregate water absorption tester

Product Details

Technical Specifications:
Upper diameter 40mm ± 3mmFine aggregate water absorption tester
Lower caliber 90mm ± 3mm
A slump cone with a height of 75mm ± 3mm
Specification of fine aggregate water absorption tester:
38X89X74mm
Fine aggregate water absorption tester
Industry standards:
T0330-2005 Fine aggregate density and water absorption test.
Fine aggregate water absorption tester, testing equipment and materialsFine aggregate water absorption tester
(1) Balance: Weigh 1kg, with a sensitivity not exceeding 0.1g.
(2) Saturated surface dry test mold: a slump cone with an upper diameter of 40mm ± 3mm, a lower diameter of 90mm ± 3mm, and a height of 75mm ± 3mm (see Figure T 0330-1).
(3) Pounding: Metal pole, diameter 25mm ± 3mm, mass 340g ± 15g (Figure T0330-1)
(4) Beaker: 500mL.
(5) Capacity bottle: 500mL.Fine aggregate water absorption tester
(6) Oven: capable of controlling temperature at 105 ℃± 5 ℃.
(7) Clean water with a temperature of 23 ℃± 1.7 ℃.
(8) Others: dryer, hair dryer (portable), tray, aluminum spoon, glass holder, thermometer, etc.