High accuracy of indoor bonding force tester

Main technical parameters:Emulsified asphalt adhesion tester
1. Pressure head: Rubber pad with a diameter of 28.6mm and a thickness of 6.4mm
2. Force measuring wrench: The maximum torque on torque gauge Z should not be less than 350N.cm, and the diameter of the transmission rod should be 8cm
3. Circular mold test: ① Diameter 60mm (inner diameter) × 6mm (height) ② Diameter 60mm (inner diameter) × 10mm (height)
4. Weight: 15KG
5. Dimensions: 420x270x560mm
6. Environmental temperature: ≤ 35 ℃.
7. Relative humidity: ≤ 85%

Key Features:Emulsified asphalt adhesion tester
1 desktop structure, easy to carry, well-designed, and aesthetically pleasing;
2 can be used for both indoor testing and on-site construction;
3. Well made, easy to use, and accurate and reliable test results.

Instruments and materials
The adhesive strength tester consists of the following parts:
Pressure structure: The pressure port can be connected to a bicycle pump or an air compressor to pressurize the cylinder. The Z atmospheric pressure of the air pump and the Z large range of the pressure gauge can reach 700kPa. The air pressure can be adjusted to the desired size and maintained constant through the air pressure regulator of the variable release valve; Cylinder height 76.2mm;
Pressure head: equipped with a lower part of the force transmission rod, and a rubber pad at the contact with the specimen. The diameter of the rubber pad is 28.6mm and the thickness is 6.4mm. The hardness is 60;Emulsified asphalt adhesion tester
Bidirectional control valve: can raise or lower the rubber base;
Force measuring wrench: mounted on the transmission rod, equipped with a torque gauge, with a Z-maximum torque of not less than 350N · cm, and a transmission rod diameter of 8cm;
Round trial mold: 6mm (height) x 60mm (inner diameter) or 10mm (height) x 60mm (inner diameter);
Timing device: stopwatch, etc.
Balance: Weigh 500g with a sensitivity not exceeding 0.1g.
Oil felt: area 150mm x 150mm, several pieces.Emulsified asphalt adhesion tester
Others: measuring cylinder, mixing pot, mixing shovel, scraper, etc.