How much is the online alkalinity meter for Gopp water quality in the UK

Shanghai supplies online alkalinity analyzer for water quality

Alkalinity is a parameter that represents the ability of water to absorb protons, usually calibrated based on the total amount of substances in water that can react quantitatively with strong acids. This type of substance

Including strong bases, weak bases, etc. The alkalinity in natural water is mainly caused by bicarbonate, carbonates, and hydroxides

Among them, bicarbonate is the main form of alkalinity in water. The main sources of pollution that cause alkalinity are wastewater discharged from industries such as papermaking, printing and dyeing, chemical engineering, and electroplating

The loss of detergents, fertilizers, and pesticides during use. Alkalinity and acidity are important indicators for judging water quality and controlling wastewater treatment. Alkalinity is also commonly used for evaluation

The buffering capacity of water bodies and the solubility and toxicity of metals in them. The definition of total alkalinity is more commonly used in engineering, generally characterized as equivalent to calcium carbonate

The concentration value. Therefore, it is not difficult to see from the definition the method of measurement - acid titration.

Shanghai supplies online alkalinity analyzer for water qualityProduct features of Aqualysis800A:

Data storage, fault recording, RS485, 4-20 mA output

❏ Automatic calibration, automatic diagnosis, and monitoring
Compact design, 400x300x180mm/4Kg
Low maintenance and reagent consumption
❏ LCD color screen display in both Chinese and English
Continuous measurement or interval measurement (0~360min)
Four programmable contact outputs
❏ 2-channel programmable digital input (can be linked with external devices)
Easy to install and simple to operate

Shanghai supplies online alkalinity analyzer for water qualityAqualysis800A Technical Parameters:

Specification and model: Aqualysis800A

Measurement method: Titration colorimetric method

Measurement time: about 3 minutes, depending on the hardness of the water

Accuracy: ± 2% of the upper limit of the selected reagent

Repeatability: ± 1% of the upper limit of the selected reagent

Power supply: 85-265 VAC, 47-63Hz, power consumption: 25VA (during operation), 3.5VA (during standby)

Protection level: IP65

Size: 400x300x180mm (WxHxD)

Display: LCD color screen display

Optional units: dH, ° f, ppmCaCO3, mmol/l

Output: 1. 4-channel programmable relay output (max.250V, 4A)

2. 1 channel 4-20 mA signal, max 750 Ω

3. 1 RS485 output

Input: 1. IN1 input (start analysis/flow control switch/water meter)

2. IN2 input (reset device)

Analysis cycle: time interval measurement (0~360min)/external signal/flow signal

Rinse time: adjustable (15-1800s)

Water quality requirements: pH: 4-10; Iron:<3 ppm; Copper:<0.2 ppm=''>

Temperature: Environment: 10 ° C-40 ° C, Water sample: 5 ° C-40 ° C

Aualysis800AWater quality alkalinity analyzerReagent type and measurement range：

(The measurement range depends on the selected reagent, and the measurement error is about ± 2% of the measurement value. 500ml, valid for 2 years)