How much is the mud discharge valve

Electric and hydraulic quick opening sludge discharge valve

1J744X hydraulic quick opening sludge discharge valveOverview:

J744X hydraulic sludge discharge valve is mainly used for various types of water tanks in water companies to remove sediment or dirt from the bottom of the tank. It can also be installed in industrial pipelines with working media such as water, gas, and tanks for shut-off purposes. It uses electric two position four-way reversing valves or manual two position four-way or directional valves for centralized control, with easy operation and flexible valve opening and closing. This valve is mainly installed outside the bottom wall of individual sedimentation tanks to remove sediment and dirt from the bottom of the tank. The related products include J644X pneumatic quick opening angle type, JM744, JM644X pneumatic, hydraulic quick opening type, H742X hydraulic type, and 100S angle diaphragm type.

IIJ744X hydraulic quick opening sludge discharge valveWorking principle:

Hydraulic quick opening sludge discharge valveIt consists of two main parts: a hydraulic cylinder and an angle type globe valve. The hydraulic cylinder drives the valve plate to rise and fall, opening or closing the valve body channel to achieve fluid flow. The L-shaped leather bowl of the hydraulic cylinder piston seal has good sealing performance and is durable. The leather bowl is made of absorbent leather, which has a lifespan of over two years. Feedback from users that it has not been replaced for up to five years after use. The opening speed is fast, usually within 15 seconds, the valve plate is fully opened, and the valve plate and valve body are soft sealed. After closing, the sealing performance is good and there is no leakage, which is easy to repair and replace. If equipped with an electromagnetic return valve to control the hydraulic cylinder, remote control, self-control, etc. can be achieved. If equipped with manual devices, 4-12 units can be installed in a row and started and closed simultaneously. The driving pressure is taken from the water plant itself, without the need for additional equipment, which can save manpower and material resources and energy. Electric and hydraulic quick opening sludge discharge valve

IIIJ744X hydraulic quick opening sludge discharge valveMain component materials:

Part Name Material
Valve body made of cast iron, cast steel, stainless steel
Valve cover made of cast iron, cast steel, stainless steel
Valve braid carbon steel, stainless steel+nitrile rubber
Valve stem made of chrome stainless steel
Diaphragm Nitrile Rubber

4J744X hydraulic angle quick opening sludge discharge valveTechnical Specifications:

Hydraulic cylinder working medium: clean water, air, oil.

Hydraulic cylinder working pressure 0.15-0.3, 0.3-1.0MPa

Medium temperature: room temperature

Ordering Notice:

Dear user, before you decide to use the J744X hydraulic angle sludge valve, please make sure to check the following product parameters with our sales staff.

1、 1. Product name and model, 2. Valve diameter, 3. Pipeline pressure used for the valve, 4. Valve body material, 5. Operating temperature under working conditions. Are there any accessories included for us to correctly select the valve for you.
2、 If the J744X hydraulic angle sludge discharge valve model has been selected by the design unit, please order directly from our sales department according to the relevant model.
3、 When the usage situation is very important or the environment is complex, please provide design drawings and detailed parameters as much as possible, and our three valve technicians will review and check for you free of charge.